Ultimaker Original

Ultimaker Original

Ultimaker Original+

Ultimaker Original+

Dimensions

Ultimaker Original dimensions
342 mm
13.5 inches
357 mm
14.0 inches
388 mm
15.3 inches

Dimensions:
342 x 357 x 388 mm
(13.5 x 14.0 x 15.3 inches)

Dimensions with bowden tube
and spool holder:

342 x 560 x 650 mm
(13.5 x 22.1 x 25.6 inches)

Weight:
11.5 kg (406 ounces)

Ultimaker Original+ dimensions
342 mm
13.5 inches
357 mm
14.0 inches
388 mm
15.3 inches

Dimensions:
342 x 357 x 388 mm
(13.5 x 14.0 x 15.3 inches)

Dimensions with bowden tube
and spool holder:

342 x 560 x 650 mm
(13.5 x 22.1 x 25.6 inches)

Weight:
10.5 kg (370 ounces)

Build volume

Ultimaker Original build volume

Dimensions:
210 x 210 x 205 mm
(8.3 x 8.3 x 8.1 inches)

Ultimaker Original+ build volume

Dimensions:
210 x 210 x 205 mm
(8.3 x 8.3 x 8.1 inches)

Printer and printing properties

Assembly type
DIY kit The Ultimaker Original+ is a DIY 3D printer kit that can be easily assembled by following online instructions. If you're looking for a pre-assembled 3D printer, check out our Ultimaker 2 Go or Ultimaker 2+.
Layer resolution
0.40 mm nozzle: 200 to 20 micron A micron is the measurement unit used to define the thickness of a 3D printed layer. 20 micron is 0.02 mm thick. 200 micron is 0.20 mm. Thinner layers are used for high detailed prints, thicker layers are great for fast prototypes.
Build plate – Ultimaker Original+
50 °C to 100 °C heated glass build plate Due to the 50 °C to 100 °C heated glass build plate you’re able to use a much larger selection of filaments for your prints. To clean the plate simply open the clamps and remove it.
Build plate – Ultimaker Original
Acrylic build plate with blue tape Using blue tape is required to ensure a smooth print surface and good adhesion.
Build plate leveling
Manual leveling The Cura’s configuration wizard will assist you to calibrate the build plate. The print head will first move to the left front corner, so you can adjust the screw and set the correct height. When finished, press “Resume” and the print head will move to the next point. Repeat these steps for all points.
Print technology
Fused Deposition Modeling (FDM) This is the process of depositing layers of filament, one on top of the other, to build up shapes and models. Also known as additive manufacturing technology, it’s the process used by all Ultimaker 3D printers.
Build speed
0.40 nozzle: up to 8 mm³/s The build speed determines how fast the filament can be extruded through the hot end of the 3D printer.
Print head
Single extrusion print head with swappable nozzles Swappable nozzles allow you quickly switch between different nozzles. The standard is 0.4 mm for easy maintenance.
Print head travel speed
30 to 300 mm/s The higher print head travel speed means faster 3D prints.
XYZ accuracy
12.5, 12.5, 5 micron The more accurate the stepper motors within the printer, the greater degree of accuracy can be achieved with each print. Our motors are engineered and tested to achieve the very highest accuracy.
Nozzle diameter
0.4 mm Swappable nozzles allow you easy maintenance and fast nozzle replacement.
Nozzle temperature
180 °C to 260 °C With such a large a temperature range from 180 °C to 260 °C, you have greater flexibility as to which filaments you can print with.
Nozzle heat up time
< 2 minutes The nozzle heat up time relates to how fast you can start printing, as well as how fast it can melt the plastic.
Build plate heat up time - Ultimaker Original+
< 4 minutes The build plate heat up time relates to how fast it can reach the print-ready temperature.
Operating sound
57 dBA Thanks to the low level of operating sound, Ultimaker 3D printers are suitable for use in the office, school and home environment.

Materials

System
Open filament system An open filament system means you can use any kind of 3D printing material to meet your needs.
Filament diameter
2.85 mm When purchasing filaments for your Utlimaker Original+, you must buy 2.85 mm diameter filament – this is the optimal size for your Ultimaker.
Supported materials – Ultimaker Original+
PLA, ABS, CPE The Ultimaker Original+ is a highly flexible 3D printer and gives you the freedom to choose whatever type of filament that suits your project. The Ultimaker Original+ is optimized for Ultimaker PLA, ABS and CPE, whilst the Ultimaker Original is optimized for Ultimaker PLA.
Supported materials – Ultimaker Original
PLA The Ultimaker Original+ is a highly flexible 3D printer and gives you the freedom to choose whatever type of filament that suits your project. The Ultimaker Original+ is optimized for Ultimaker PLA, ABS and CPE, whilst the Ultimaker Original is optimized for Ultimaker PLA.
Ultimaker filament
A spool of Ultimaker filament is 750 g Optimized perfectly for the Ultimaker Original+, we offer a range of 750 g filaments that are 2.85 mm in diameter and approximately 90 m long.

Requirements

Software
Cura, our free print preparation software Cura is our industry-leading slicing and preparation software that turns your 3D model into a file your printer can use. You can download Cura for free here.
Supported OS
Free on macOS, Windows and Linux Cura works seamlessly on macOS, Windows and Linux.
Supported file types
STL, OBJ and AMF An STL file is the most used file type for 3D printing. Nearly any 3D modeling software program is able to create these files.
File transfer
Standalone SD card printing Simply copy the G-code file that Cura created for you onto the supplied SD card and insert it into your Ultimaker Original+. No computer connection required during printing.
Operating ambient temperature
15 °C to 32 °C (59 °F to 90 °F) Your Ultimaker Original+ operates at its best at these temperatures.
Nonoperating temperature
0 °C to 32 °C (32 °F to 90 °F) Your Ultimaker Original+ can be stored or left inactive at these temperatures.
Input - Ultimaker Original+
100 - 240V
4A, 50-60Hz
221 W max.
Output - Ultimaker Original+
24 V DC, 9.2 A
Input - Ultimaker Original
100 - 240V
2A, 50-60Hz
120 W max.
Output - Ultimaker Original
19 V DC, 6.32 A

Service and support

Warranty
You’ll enjoy a comprehensive 12 month warranty (excl. hot end).
Lifetime support
Expert technical support via email, phone, or from our global community is available to you for the lifetime of your printer.
Extended support
Online resources, an easy to use app, extensive manuals, a detailed knowledgebase and so much more. You’re never far from the answers you need.

Hardware components

See the hardware components in these schematics
Ultimaker 2 Extended+ back hardware components
Ultimaker 2 Extended+ back hardware components

What's included

  • Every part to assemble an Ultimaker Original+
  • UltiController with SD card
  • Power supply and cable, glue stick, grease, hex wrenches and USB cables
  • 750 g Ultimaker PLA
  • Online assembly manual
  • Cura, our award-winning print preparation software
  • Powerful Ultimaker app
  • Lifetime expert support
  • An active global community of makers

The Ultimaker Family

Compare our 3D printers
Ultimaker 3

Ultimaker 3

From € 2.995,00 *excl. VAT Learn more

Ultimaker 3 Extended

From € 3.695,00 *excl. VAT Learn more
Ultimaker 2+

Ultimaker 2+

From € 1.895,00 *excl. VAT Learn more

Ultimaker 2 Extended+

From € 2.495,00 *excl. VAT Learn more
Ultimaker 2 Go

Ultimaker 2 Go

From € 1.195,00 *excl. VAT Learn more
Ultimaker Original

Ultimaker Original+

From € 995,00 *excl. VAT Buy now

Ultimaker Original

From € 795,00 *excl. VAT Buy now
Cura Software

Cura Software

Free on macOS, Windows and Linux Learn more
Ultimaker app

Ultimaker app

Free on iOS and Android Learn more
Ultimaker 3 app

Ultimaker 3 app

Free on iOS and Android Learn more
Materials

Materials

From € 33,00 *excl. VAT Learn more
Add-ons

Add-ons

From € 12,00 *excl. VAT Learn more
Spare parts

Spare parts

From € 12,00 *excl. VAT Learn more
Support