Installing the Olsson Block

  • Unscrew the set screw most of the way out of the Olsson block. Installing the block with the screw all the way in often results in a bound up screw and a tilted block.
  • Screw the Olsson block into the hot end isolator. Note that now the entire block can be rotated to mount it into the print head, as opposed to the hot end isolator being turned using the screwdriver.
  • Make sure the hot end isolator just covers the screw-thread of the Olsson block; there should be a small gap and they should not touch each other.

Olssen #5