Mounting the main board

Parts needed

Parts needed
Parts needed

Main board assembly

Caution: When handling electronics make sure that you are not statically charged. This can permanently damage your electronics. Touch bare metal before continuing with the following steps.

  1. Place the Ultimaker on its left side and raise the Z stage.
  2. Insert four M3x20 bolts through the bottom panel from the inside and place the spacers around the bolts.
  3. Hold the main board with the connectors towards you and the on/off button towards the right panel. Loosely secure the board to the four bolts.

Main board
Main board
Insert bolts through the bottom panel and place the spacers

Main board
Main board
Loosely attach the main board

Index
Support