Placing the print head in the frame

  1. Guide the X print head shaft through the print head, from left to right.
  2. Guide the Y print head shaft through the print head, from front to back.
  3. Place the print head with shafts inside the frame, mind the orientation.
  4. Place the X print head shaft into the left sliding block.
  5. Tilt the right sliding block and insert the right side of the X print head shaft into the sliding block.
  6. Close the claws of the left and right sliding blocks.
  7. Tilt the front and back sliding blocks and insert the Y shaft into the sliding blocks.
  8. Close the claws of the front and back sliding blocks.
  9. Place the wooden parts C into the four sliding blocks and tighten the bolts to completely secure the print head shafts.
  10. Insert the M3x30 bolts in all four sliding blocks and lock in place with four hex nuts.

Print head
Inserting the print head shafts
Print head
Placing the print head in the frame

Print head
Closing the claws
Print head installation
Inserting wooden part C

Print head
Inserting an M3x30 bolt in the sliding block

Index
Support