Assembly
Assembly manual
Once you've received your Ultimaker Original kit it's time to start building. We have a complete assembly manual available so you can build your Ultimaker Original according to the instructions.
-
Ultimaker 3
- Get started
- Operation
-
Maintenance
- Updating the firmware
- Storage and handling of materials
- Maintenance schedule
- Clean the printer
- Lubricate the axles
- Check for play on axles
- Check the tension of the short belts
- Check for residue in the front fan of the print head
- Check the quality of the silicone nozzle cover
- Lubricate the lead screw of the Z motor
- Clean the print cores
- Clean the feeders
- Replace the Bowden tubes
- Troubleshooting
- Downloads
- FAQ
- More support
-
Ultimaker 2+
- Get started
- Operation
-
Maintenance
- Updating the firmware
- Build plate calibration
- Storage and handling of materials
- Hardware maintenance
- Clean the printer
- Lubricate the axles
- Check for play on axles
- Check tension of short belts
- Lubricate the lead screw of the Z motor
- Retighten the hot-end isolator
- Clean the feeder and replace the Bowden tube
- Troubleshooting
- Downloads
- More support
-
Ultimaker Original+
-
Assembly
- Assembly
- What's in the box?
- Preparing the panels
- Assembling the frame
- Attaching various parts
- Sliding blocks
- Attaching the caps
- X and Y axles
- Z stage assembly
- Z stage installation
- Print head assembly
- Print head installation
- Aligning the print head
- Feeder assembly
- Bowden tube
- Spool holder
- UltiController
- Mounting the main board
- Connecting
- Electronics cover
- First use
- Printing
- Maintenance
- Troubleshooting
- Additional information
-
Assembly