Completing the print

Removing the print from the build plate

Once your 3D print is finished it must be removed from the build plate. There are several methods to use, depending on how the print is adhered to the build plate. Take a look at this page for instructions how to remove the print from the build plate.

Removing the print

Removing support material

Prints for which PVA has been used as support material require some post-processing to remove the PVA support material. This can be done by dissolving the PVA in water. Take a look at this page for detailed instructions on how to dissolve PVA.

Submerge the print in water
Rinse with water

Index
Support