Prepare a print with Ultimaker Cura

Interface

After you have added the Ultimaker S5 in Ultimaker Cura, the main interface will become visible. Here is an overview of the interface.

The Ultimaker Cura interface

  1. Open file
  2. Adjustment tools
  3. Non-printable areas
  4. 3D model
  5. View mode
  6. Printer, material, print core and build plate configuration
  7. Print Setup (recommended mode)
  8. Model information
  9. Print job information (print time and material usage)
  10. Print over network, or save to file or USB stick

Slice a model

To slice a model in Ultimaker Cura:

  1. Load the model(s) by clicking the Open File folder icon.
  2. In the sidebar (right side of the screen), check if the materials, print cores and build plate are correct.
  3. Use the Adjustment Tools to position, scale and rotate the model as desired.
  4. Select your desired settings (layer height/print speed, infill, support and build plate adhesion) under Print Setup.
  5. To view the result of the selected settings, change the view mode from Solid view to Layer view.
  6. In the bottom-right corner, select Print over network, Save to file or Save to USB depending on the printing method.

✔ Tip: When printing with support, you have the option to select the extruder that you want to use to print the support structure. This allows you to print your model with PVA support, Breakaway support or build material support on your Ultimaker S5.

✔ Tip: If you create a dual-color print you have to assign material colors to the models and merge the models before finishing your slice.

For more instructions on how to use Ultimaker Cura, take a look at the Ultimaker Cura manual.

Using the Layer view

Index
Support