Manuals
User manual
Besides these online support pages, the user manual is also available as a PDF in multiple languages. You can download the manual below.
- English S5 user manual
- Czech S5 user manual (cs)
- Danish S5 user manual (da)
- German S5 user manual (de)
- Spanish S5 user manual (es)
- Finnish S5 user manual (fi)
- French S5 user manual (fr)
- Italian S5 user manual (it)
- Hungarian S5 user manual (hu)
- Japanese S5 user manual (ja)
- Korean S5 user manual (kr)
- Dutch S5 user manual (nl)
- Norwegian S5 user manual (no)
- Polish S5 user manual (pl)
- Portuguese S5 user manual (pt)
- Russian S5 user manual (ru)
- Swedish S5 user manual (se)
- Turkish S5 user manual (tr)
- Simp. Chinese S5 user manual (zh-hans)
- Trad. Chinese S5 user manual (zh-hant)
-
Ultimaker S5
- Get started
- Operation
-
Maintenance
- Update the firmware
- Material handling and storage
- Maintenance schedule
- Clean the printer
- Lubricate the axles
- Check for play on the axles
- Check the tension of the short belts
- Check for debris in the front fan of the print head
- Check the quality of the nozzle cover
- Lubricate the Z screw of the Z motor
- Clean the feeders
- Clean the print cores
- Lubricate the feeder gear
- Replace the Bowden tubes
- Clean the system fans
- Lubricate the hinges
- Troubleshooting
- Downloads
- More support
-
Ultimaker 3
- Get started
- Operation
-
Maintenance
- Updating the firmware
- Storage and handling of materials
- Maintenance schedule
- Clean the printer
- Lubricate the axles
- Check for play on axles
- Check the tension of the short belts
- Check for residue in the front fan of the print head
- Check the quality of the silicone nozzle cover
- Lubricate the lead screw of the Z motor
- Clean the print cores
- Clean the feeders
- Replace the Bowden tubes
- Troubleshooting
- Downloads
- FAQ
- More support
-
Ultimaker 2+
- Get started
- Operation
-
Maintenance
- Updating the firmware
- Build plate calibration
- Storage and handling of materials
- Hardware maintenance
- Clean the printer
- Lubricate the axles
- Check for play on axles
- Check tension of short belts
- Lubricate the lead screw of the Z motor
- Retighten the hot-end isolator
- Clean the feeder and replace the Bowden tube
- Troubleshooting
- Downloads
- More support
-
Ultimaker Original+
-
Assembly
- Assembly
- What's in the box?
- Preparing the panels
- Assembling the frame
- Attaching various parts
- Sliding blocks
- Attaching the caps
- X and Y axles
- Z stage assembly
- Z stage installation
- Print head assembly
- Print head installation
- Aligning the print head
- Feeder assembly
- Bowden tube
- Spool holder
- UltiController
- Mounting the main board
- Connecting
- Electronics cover
- First use
- Printing
- Maintenance
- Troubleshooting
- Additional information
-
Assembly
