The Starter Pack launch event at Digital Harbor Foundation

Introducing the Ultimaker Design Engine Starter Pack

Informal learningTechnology

Why is it that so many 3D printing-powered education projects rely heavily on downloading and printing someone else's creations? For the 2017 back to school season, the Ultimaker North American Community Team has constructed a game that puts the power of design back in your hands. Presenting the Ultimaker Design Engine Starter Pack: a game created to provoke, inspire, and entertain students, educators, 3D designers, artists, and engineers of all experience levels!

The Starter Pack can be used to generate scores of new projects, fueling a deeper exploration into the use of desktop 3D printers. For educators, students, and 3D designers of all backgrounds, the Starter Pack is both a handy icebreaker and a challenging activity that sparks creativity.

Box - Starter Pack
The Ultimaker Design Engine Starter Pack!

As an engineer, we are taught to look for the 'right' answer. This game is wonderful at breaking through 'right answer' thinking to reach creative and inspired outcomes that can lead to real innovation!

—Kathy Rutherford, FIRST Robotics Mentor

In collaboration with our North American reseller partners, Ultimaker will offer a free Ultimaker Design Engine Starter Pack for every new machine ordered by a school, library or makerspace from September 1st to December 31st, 2017 (or until Starter Pack supplies run out)*.

Not picking up a new Ultimaker this season? There are other opportunities to experience the Starter Pack at public events organized by the North American reseller partners and the Ultimaker North America Community Team at education workshops and other events we attend and host.

Are you going to Maker Faire New York 2017? Join the Ultimaker NA Community Team for a special event for educators at the Fat Cat Fab Lab as a part of our “Real World 3D Printing” Panel.

* Offer exclusive to customers of our North American resellers only.

JeffDESIGN - Starter Round
Medical students and professors hard at work with their first round of the Starter Pack

How do you play?

In the recommended “Starter Round” that introduces the game to first time users, participants receive one Challenge Card and two Parameter Cards.

The Challenge Card sets the stage for all of the activity that follows. The participant studies this card to identify the problem(s) to solve.

The two Parameter Cards provide additional considerations the participant must address in the design.

Having the parameters and modifiers forces you to think critically about what direction you might take your design. I would not have gone the direction I did with my challenge if I wasn’t forced to consider these elements, the constraints were very constructive.

— Participant at a JeffDESIGN Starter Pack launch event in Philadelphia, PA

Starter Round Example - BACK TO THE DRAWING BOARD
Starter Round - "Back to the drawing board"

Here’s a chance for you to check out the Starter Pack for yourself!

We have dealt the following cards to you (above), the black-and-white Challenge Card on the left, and two blue-bordered Parameter Cards on the right. Read them, and consider what physical object(s) you might create/invent/construct that would solve this challenge: “Design a tool that can be used for drawing and sketching.” And how will you address the face-up elements on the Parameter card in your design -- “Bike” and “Ancient”?

By the end of just three minutes, you must generate the following:

  • Name of your creation.

  • An elevator pitch (no more than one minute) that would clearly communicate your idea to a stranger.

  • Any quick sketches you need to help you to describe your project.

A challenge for 3D printing? No problem! The later rounds of the Starter Pack are great opportunities to introduce design-for-manufacturing related concepts, but for the starter round, set your imagination free to focus on finding a solution to the problem first, and think materials and methods second.

Set a timer for just 3 minutes, and start designing!

Printed Solid - Starter Pack launch event
Starter Pack launch event at Printed Solid, in Newark, Delaware

Welcome back! How did it go? If that sounded like a lot to accomplish in just three minutes, you aren’t alone -- please reassure yourself that everyone else tackling the challenge has had the same limited time. A raw and fresh idea is all you need!

Guess what? Whether or not the project you came up with is a top priority for you in the long run, consider your invention from the perspective of a novice desktop 3D printer operator. What might you learn about the challenges and opportunities for 3D printing if you took this exercise further?

Middle School students at the NYU Tandon Makerspace
Middle school students at the NYU Tandon Makerspace exploring a sneak preview of the Starter Pack

Stop scratching your head and start creating!

Lizabeth Arum and Matt Griffin of the Ultimaker NA Community team devised this card game specifically to address requests from educators for tools to help students to create new works from their own imagination to help motivate them through the process of mastering desktop 3D printing.

We have often seen how after a few initial projects that introduce students to 3D printing—like making key fobs, nametags or by downloading pre-existing files to print or modify—educators are at a loss for what comes next. How can they help their students take advantage of the promise of desktop 3D printing -- a general purpose tool they can use to create original designs?

That’s where the Ultimaker Design Engine Starter Pack comes in. The game can be used either classwide or by individual students. Use the cards with the Starter Round rules to promote a quick brainstorming activity or use the cards as a starting point for a long term project that includes research, prototyping, and documentation. With over 50 challenges, 60 parameters, 20 modeling modifiers, and an expansion pack, your students will never be prompted to design the same thing twice.

Jaedon Alleyne - Pick A Card
Jaedon picks an additional parameter card

A great way to get your students in a designer’s mindset; the cards will elevate brainstorming to an even higher level.

— Andrew Woodbridge, Grover Cleveland High School, Ridgewood, NY

The right projects

In the spirit of physics and engineering class egg drop challenges, 48hr hackathons, and design/art school exercises, the Starter Pack aims to activate participants to create wild, spur of the moment projects. And educators find that these adhoc exercises strike a nice balance between easy-to-complete, school day projects and ambitious, semester-long student projects.

overhead - starter session - Rollin Stone
Sketching and experimenting

Tune your own style of play

While the Starter Pack includes instructions for several common approaches for how to use the cards in an educational context, we anticipate that the uses and “flavors of play” will vary greatly depending on the specific aims of the participants.

Our aim with the Starter Pack is to offer a flexible enough set of rules to suit a range of styles of play, numbers of players, and levels of experience. We expect players to discover new and powerful approaches to style of play over time, and share them with us!

Cards

I could see so many applications for this activity, from icebreakers, to brain breaks, to brain stretches. There are no limits. There were so many ways to play.

— Shawn Grimes, Executive Director, Digital Harbor Foundation

Also included in the set are a series of warm-up cards that can be used as class assignments. One warm-up challenge, “The Great Edge Hunt,” asks participants to go on a fillet and chamfer scavenger hunt. Another, “8bit Glory,”  asks you to create a low-poly version of a favorite design.

One of the most valuable elements of the Starter Pack is completely separate from the gameplay elements. The set also comes with 50 contributed project cards from educators who have successfully incorporated 3D printing into their curricula. Projects range from beginner to intermediate to advanced and are categorized by age of the intended audience, subject, and whether they are activities or teaching objects. All contributed project cards link to more information so that educators can use this information as inspiration for their own lessons.

Contributor Cards
Contributor Cards
Advanced Starter Pack use
How would you use the Starter Pack in your classroom, or in self-guided training?

Starter Pack Challenges and Events

Following the launching of the campaign on August 29th, we will host weekly online challenges starting September 5th lasting eight weeks to allow online community participation and as a means to introduce the cards and build excitement surrounding them. Check back next Tuesday for the rules and prizes -- including the opportunity to compete to win a 3D printer!

I am in love with your game! When the kids played the game the true dynamic possibilities shined through!

— Jan Abernethy, East Elementary, Greenville, PA

Explore the Ultimaker Pioneer Program

Read more education blogs

    • Naturalis Biodiversity Center: Prehistoric prints, cutting-edge technology

      Naturalis Biodiversity Center: Prehistoric prints, cutting-edge technology

      Naturalis Biodiversity Center, the Netherlands’ national natural history museum, is using 3D printing to create both partial and full dinosaur skeletons for public display.

      • History
      • Informal learning
    • Ultimaker Met

      Bringing 3D printing to the Metropolitan Museum of Art

      Part of the mission from Ultimaker North America's Community team is to help educators get up and running with 3D printing and to help them find meaningful ways to integrate the technology into their curriculum while celebrating their successes. When we w

      • Secondary education
      • History
    • College of the Desert 3D printing club

      Feel the Action: Learn about how a college is changing lives in ways we can touch!

      A 3D printing club emerges at College of the Dessert to help make ideas accessible to all students

      • Special education
      • Technology
    • Testing Quadcopter

      How the tools we use influence the designs we make

      Michael Delaney writes about his iterative process of integrating electronics and 3D printing in his programmable quadcopter project.

      • Informal learning
      • Technology
    • Smithsonian Learning Lab

      3D printing as part of the Smithsonian Learning Lab

      Pioneer Christopher Sweeney shares the work he did with 3D printing and the Smithsonian Learning Lab to create collections of educational resources, organized and structured for teaching and learning.

      • Informal learning
      • Art
    • Harvard calculus courses use 3D printed models to engage students

      Harvard calculus courses use 3D printed models to engage students

      What is the best way to teach concepts like surface area and volume relating to mathematical objects in a three-dimensional world? The curricular design team at Harvard University thinks the...

      • University
      • Mathematics
    • Code your 3D designs with Tinkercad’s new Codeblocks app

      Code your 3D designs with Tinkercad’s new Codeblocks app

      Tinkercad released Codeblocks last June, and now that it's out of Beta, Pioneer Rob Morrill tells us how he uses it.

      • Informal learning
      • Technology
    • Mathematica Tea Light Holder

      3D Design in Mathematica: Tea Light Holders

      If it’s happening in Ultimaker’s world, you can find out about it here. 3D printing stories about inspiring moments, original 3D printed projects and much much more.

      • Informal learning
      • Mathematics
    • printingUltibot

      Modifying an STL with Tinkercad

      When Ultimaker Pioneer Alex Larson contacted me about the Ultibot-D project, I was super excited. As a teacher and parent, I am a huge cheerleader for risk. I printed the base models at ⅕ scale and gave it to my students to explore

      • Primary education
      • Technology
    • Ultimaker at Camp

      Math Camp: Having fun doing stuff

      Pioneer Dr Toni Szymanski writes about summer fun at camp with 4th and 5th graders, math, and 3D printing.

      • Primary education
      • Mathematics
    • 3D printing for glass

      GlitchCraft

      Guest blogger Astrida Valigorsky writes about combining the old and the new at Timothy Belliveau's GlitchCraft class where students combined 3D printing and glass blowing.

      • Informal learning
      • Technology
    • 3D printing in math and chemistry

      A unique 3D printing collaboration between mathematics and chemistry faculty

      Passing it on. After integrating 3D printing into her own math courses, Kristen Schreck helps spread 3D printing across disciplines at Saint Xavier University.

      • University
      • Science
    • basecampProject

      Using Basecamp to manage your classroom/makerspace projects and print queue

      Pioneer Andrew Woodbridge uses Basecamp to organize his students' projects, and he explains how you can too.

      • Secondary education
      • Technology
    • World monument project

      Living world monuments assignment

      Pioneer Joanne Barrett shares about a middle school project that combines 3D printing, Augmented Reality, History, and Art.

      • Secondary education
      • History
    • toni teaching fusion

      Teacher training for 3D printing

      Pioneer Dr. Toni Szymanski thought that 3D printing could engage students in math classes. To test this out, she had to learn all about 3D printing first.

      • Secondary education
      • Mathematics
    • Finland’s mobile libraries

      3D printers in the public library: Finland ahead of the curve

      US Professor Joshua Pearce, sponsored by Fulbright Finland for Research, shares his first impressions of Finnish libraries.

      • Informal learning
      • Technology
    • parts in cura (1)

      My reintroduction to Netfabb

      A recent NetFabb workshop convinced the writer that they can't live without this application. See why it's time to take another look at Netfabb.

      • Secondary education
      • Technology
    • buckeyball

      Modeling rocks at iCREATE

      iCREATE's Tiffany Huang shared an iCREATE success story about Jackie Zheng.

      • Secondary education
      • Science
    • goblet project

      Integrating 3D printing and The Goblet Project

      Pioneer Chris Hanusa shares one way he integrated 3D printing into his Integral Calculus class

      • University
      • Mathematics
    • Happiness

      Lessons in letting go - releasing student energy speeds creation and use of our art and innovation lab

      Pioneer John Nordell enlisted his students to put the Art and Innovation Lab together. The result was one of the best experiences he has had as an educator.

      • University
      • Technology
    • hero wrenchs

      Wrench Engineering

      Inspired by NASA printed in space wrench, Pioneer Rob Morrill gave his fifth graders a design challenge to design their own real-world tool.

      • Primary education
      • Engineering
    • ceramic stamps

      Digital fabrication informs ceramics decorative process

      Pioneer Young Kim blends his classical arts background with digital fabrication to create a ceramic project that incorporates 3D printing.

      • Secondary education
      • Art
    • Empathy map

      Elementary-College Engineering Design partnership

      Pioneer Matthew Wigdahl writes about how his fifth graders and local undergraduate engineering students learn from each other.

      • Primary education
      • Engineering
    • 014-SchoolHero

      Introducing Ultimaker’s Core Lessons Set for STEAM Educators

      Designed by the Ultimaker North America Community Team, our new Core Lessons: STEAM Set is a resource for educators who need inspiration and ideas when they bring 3D printing into their classrooms.

      • Primary education
      • Technology
    • MakerGirl

      Empower one MakerGirl, empower the world

      how the group traveled 10,000 miles around the country to help bring 3D printing workshops to over 1,000 young girls. In this week's post we catch up with the organization that is still working to create a new generation of confident, creative women leade

      • Primary education
      • Technology
    • Georgia Connections Academy

      Building a mobile maker space: part 2—up and rolling

      So what exactly does a Mobile MakerSpace look like? That's the question I had to ask myself once I began the project of bringing 3D printing technology to virtual students. When we started this project, we knew we needed something that would be easy to

      • Secondary education
      • Technology
    • Building a mobile makerspace: part 1— getting started

      Building a mobile makerspace: part 1— getting started

      Pioneer Wendy Aracich is putting together and implementing a mobile MakerSpace for her virtual school of 4000 students spread across the state of Georgia.

      • Secondary education
      • Technology
    • coca cola upcycle

      Upcycling community project

      Upcycling challenges students and educators to use their creativity and 3D printing skills to breathe new life into a few familiar objects.

      • Informal learning
      • Technology
    • LibraryLyna

      Tactile Problem/Solution Bank Community Project

      3D modeling and printing should be accessible of every educator so that they may offer their students tactile means to understand spatial concepts.

      • Secondary education
      • Languages
    • pecha-kuchas

      Construct3D to Kamehameha Ed Tech Conference

      Last year Pioneer Greg Kent traveled from Hawaii to North Carolina to attend Construct3D 2017. We thought we'd share his reflections with you now since we recently announced Construct3D 2018

      • Secondary education
      • Technology
    • Plastic Ocean by Kevin Krejci

      Ocean Plastic Community Project

      The Ultimaker Community Team will be launching a series of interdisciplinary projects over the next few months that challenge students to research, explore, design, and 3D print. Ocean Plastic is the first project of this series.

      • Secondary education
      • Geography
    • Design Engine Box

      Design Engine community project

      We want to challenge educators and students to help evolve the Design Engine game. We want to see how you're using or modifying the game with your students, and we want to incorporate your ideas into the next edition.

      • Informal learning
      • Technology
    • Drone1

      Using drones and 3D printing to develop design thinking during a summer robotics camp

      Pioneer Yuriy Drubinskiy writes about his experience leading a summer program and how creating drones with 3D printing brings form, structure, and design together.

      • Secondary education
      • Technology
    • fractal2

      3D printed fractals at JMU 3SPACE

      Pioneer Professor Laura Taalman, (a.k.a. mathgrrl), reviews a multi-week study of fractals by general education math students in the JMU 3D printing classroom.

      • University
      • Mathematics
    • The Starter Pack launch event at Digital Harbor Foundation

      Introducing the Ultimaker Design Engine Starter Pack

      Presenting the Ultimaker Design Engine Starter Pack: a game created to provoke, inspire, and entertain students, educators, 3D designers, artists, and engineers of all experience levels!

      • Informal learning
      • Technology
    • first puzzle cube and package to be made on a 3D printer entirely out of PLA

      Davidson Desktop Doohickeys: Puzzle cubes

      Pioneer Adam Davidson writes about a project in his curriculum that is a rite of passage for his high school's engineering program students. He explains at how it started and what caused it to change

      • Secondary education
      • Engineering
    • soft robot mold

      3D printing with UMaine Bioengineering students

      If it’s happening in Ultimaker’s world, you can find out about it here. 3D printing stories about inspiring moments, original 3D printed projects and much much more.

      • University
      • Science
    • Star Wars and STEAM

      3D printing, Arduino, and Star Wars: A guide to K-12 STEAM engagement

      If it’s happening in Ultimaker’s world, you can find out about it here. 3D printing stories about inspiring moments, original 3D printed projects and much much more.

      • Secondary education
      • Technology
    • Cam-ball-launcher

      Nautilus cam ball launcher

      Design process is about discovery through iteration. Pioneer Brad Whitehead describes how his FTC robotics team learned this while working on a unique ball launcher.

      • Special education
      • Technology
    • 3D-printed molecules

      3D printable molecular models

      Tandy Grubbs, Professor of Chemistry, writes about how chemistry students at Stetson University are taking advantage of 3D printing to better visualize the molecular world.

      • University
      • Science
    • animal adaptations

      Animal Adaptations

      If it’s happening in Ultimaker’s world, you can find out about it here. 3D printing stories about inspiring moments, original 3D printed projects and much much more.

      • Primary education
      • Technology
    • Launching water rockets

      3D water rockets

      Pioneer Tim Cooper explains what to do with a First Lego League team in the off season when they love rockets and 3D printing.

      • Primary education
      • Science
    • Three reasons for open source tech in your 3D printing classroom

      Three reasons for open source tech in your 3D printing classroom

      Pioneer Joshua Pearce explains why educators should consider using free and open source options in and out of the 3D printing classroom.

      • University
      • Technology
    • 3D printing artifacts

      3D printing artifacts from the Penn Museum

      The chance to hold a 3D printed historical artifact in our hands is one of the greatest ways to boost students' engagement with science, engineering, and culture. Learn how challenging and exciting it can really be.

      • Secondary education
      • History
    • UTEP Lab

      Managing an open 3D printing lab

      What’s it like to be a student administrator for a 3D printing lab space? What kind of knowledge and experiences could you offer to students at your own school by hiring them for such position?

      • University
      • Engineering
    • 3D printing in the classroom

      Why I use 3D printing in the classroom (and why you should too!)

      While 3D printing is not new to designers, engineers and other professionals in need of rapid prototyping tools, it is still a new and exciting technology for our students. Pioneer Grace Bennett shares why teachers should get started with 3D printing.

      • Secondary education
      • Technology
    • 3D printed whistles

      Thinking about the environment

      The learning curve associated with 3D printing can produce a lot of 3D printed waste. It's time to start exploring and thinking about more sustainable options.

      • Informal learning
      • Geography
    • 3D printed Cryptex puzzle

      #1 reason to love math: 3D printed puzzles

      Pioneer Andreas Kaiser writes about the power of puzzles in the classroom and how recreating or designing puzzles is a perfect fit for his engineering students.

      • Secondary education
      • Mathematics
    • 3D printing in Multivariable Calculus

      Our 3D printing journey in Multivariable Calculus

      Here’s a story of the next generation of 3D printing pioneers exploring the 3D printing technology in Multivariable Calculus with the Ultimaker 2+.

      • University
      • Mathematics