Tucci Hot Rods: 3D printing final custom car parts
Snow Business: 3D printing final parts for high-value snow machines
Volkswagen Autoeuropa: Maximizing production efficiency with 3D printed tools, jigs, and fixtures
Looks like the light blue material was slightly too hot?
conny_g replied to topic:
Had the same issue last week. You need to set Travel > X/Y Layer start to something 100/45. For both extruders.
Mark 2 (dual extruder mod for UM2) test after upgrading to 3DSolex block/nozzles
3D Print made by conny_g
Ah, that's the reason for the downtimes the last days.I'd say the site is still not "fast". If it's faster than before I can't tell really, the feeling is still - "uh, I have to reload, that will take a while".Just did a test, it's still some 4-5 seconds for a reload. For my tast...
Yes, that's also my experience every time I work with S3D. While Cura is perfectly tuned to work with the Ultimaker you need to find a bunch of settings in S3D yourself. Of course it's the same with dual, you need to tune yourself, what Cura already has.And it seems to be less clever...
The S3D dual profile of MarcoUbtz I linked above worked pretty quickly, thanks, Marco! :-)But somehow S3D feels so much less intelligent in dual printing than Cura, once you got used to the new Cura 2. Not so happy with how it behaves.
There is something:http://ultimaker.com/en/community/48788-ultimaker-mark2-the-smart-dual-extrusion-upgrade?page=12&sort=#reply-181802https://www.dropbox.com/sh/nbc006f6ym2d6b9/AAD8J_Mv_j4y6Hq3KEtJRvcea?dl=0(page 12, first entry, by @MarcoUbtz)@SanderVG,th...
I am looking for a sample/template factory file for Simplify3D for Mark 2. I remember that there was one around, but can't find it.Anyone still knows where this was mentioned / published?And once we have it, should we add it to the Mark 2 Git repository?
Great lesson learnt, thanks for sharing!