Unlimited application potential.
Specialized for engineering applications.
High-performance and certified materials
Over 300 materials to choose from.
From polymers to composites to metals.
Explore our support content
Pricing or financing options
Press and general inquiries
Contact our support team directly
4x the productivity of its predecessor while also improving print quality to 0.15mm ± 0.15%. That is made possible by the innovative UltiMaker Cheetah motion planner, together with new high flow cores and improved feeder system.
Request a quote
Key features
Unlock new levels of efficiency with the new UltiMaker Cheetah motion planner, redesigned high flow print cores, built in accelerometer, new feeder system and improved firmware
Up to
speed
acceleration
while also improving the quality of the print to 0.15mm ± 0.15%.
The dual extrusion design works together with software and firmware features to allow you to combine any 2 materials no matter how different they are, with minimal material waste and high reliability.
Print complex multi-material parts
Digital Factory is designed to streamline every step of your 3D printing workflow, from slicing, to file management and even maintenance. Scalable for any team or enterprise, Digital Factory makes managing your 3D printing projects easier, faster, and more collaborative.
Designed and built in Europe, the UltiMaker S8 is equipped with comprehensive security features, offering peace of mind for professionals in engineering and manufacturing. From secure hardware to advanced firmware, every aspect is designed to protect your intellectual property and ensure safe operation.
New hardened feeder module design inherited from Factor 4 for improved grip and better material control at high speeds.
The dual extrusion design works together with software and firmware features to allow you to combine any 2 materials no matter how different they are, which low material waste and high reliability.
Independently tested to remove up to 95% of ultrafine particles to increase air quality peace of mind. The fully enclosed build chamber also boosts print quality.
The new AA+ and CC+ print cores, exclusive the the UltiMaker S8 have a new quad-chamber design that allows for 2.5x more flow and also help with regulating the pressure in the print head for cleaner prints.
Skip using glue and remove parts effortlessly with the PEI-coated flexible build plate. Its patent-pending design uses 25 magnets and 4 pins for perfect alignment – reducing the time spent using the S8 and increasing productivity.
Access the UltiMaker Cura features that speed up your workflow and increase print success – like intent profiles, easy remote printing, and more.
Engineered for industrial applications where tribological performance is needed, Nylon CF Slide is a Nylon 612 CF copolymer offering wear resistance, temperature stability up to 180°C, and PFAS-free performance.
Learn more
The new AA+ and CC+ print cores, exclusive to the UltiMaker S8, have a new quad-chamber design. Allowing for 2.5x more flow and also help regulate the pressure in the print head for cleaner prints.
Request a quote
Our team can help you design the right package for your needs, provide business pricing or financing options, help with receiving a purchase order or preferred vendor processes, and more.
A proven selection of polymers to help you address a wide range of use cases.
Print Core:
Coefficient of friction
HDT B
Impact
strength:
Print Core:
Hardness:
Thermal resistance:
Impact
strength:
Print Core:
Hardness:
Thermal resistance:
Impact
strength
Print Core:
Hardness:
Thermal resistance:
Impact
strength:
Print core:
Hardness:
Thermal resistanceL:
Impact
strength:
Print Core:
Hardness:
Thermal resistance:
Impact
strength:
Print Core:
Hardness:
Thermal resistance:
Impact
strength:
Print Core:
Hardness:
Thermal resistance:
Impact
strength:
Print Core:
Hardness:
Thermal resistance:
Impact
strength:
Print Core:
Hardness:
Thermal resistance:
Impact
strength:
Print Core:
Hardness:
Thermal resistance:
Impact
strength:
Print Core:
Hardness:
Thermal resistance:
Impact
strength:
The physical space inside the UltiMaker S7 that can be used for single or dual extrusion 3D printing.
330 x 240 x 300 mm (13 x 9.4 x 11.8 inches)
The 3D printer's dimensions, including the spool holder.
W 495 x D 585 x H 800 mm (W 19.5 x D 23 x H 31.5 inches)
This is the process of depositing layers of filament, one on top of the other, to build up shapes and models. It is a form of additive manufacturing technology and the process used by all UltiMaker 3D printers.
Fused Deposition Modeling (FDM)
The filament diameter that achieves optimal results on UltiMaker S series 3D printers.
2.85 mm
The net weight of the 3D printer.
29.1 kg (64.2 lbs)
The peak power output that the printer can reach – usually when the heated bed and hot ends are heating up.
500 W
*Typical accuracy based on selected geometries, materials, and randomly selected machines
± 0.15 mm ± 0.15% feature nominal length*
The rate at which melted filament is pushed through the nozzle.
Up to 35 mm3/s
"XY speed" refers to the movement speed of the print head along the X and Y axis, "acceleration" is how quickly the print head can change its speed on the X and Y axis, and "jerk" is the rate at which the acceleration changes.
Up to 500 mm/s, up to 50.000 mm/s2, up to 100.000.000 mm/s3
A micron is the measurement used to define the thickness of a 3D printed layer. 20 micron is 0.02 mm thick. Thinner layers are used for high-detail prints, thicker layers are great for fast prototypes.
0.25 mm nozzle: 150 - 60 micron 0.4 mm nozzle: 200 - 20 micron 0.6 mm nozzle: 300 - 20 micron 0.8 mm nozzle: 600 - 20 micron
The more accurate the stepper motors within the printer, the greater degree of accuracy and finer resolution can be achieved with each print.
6.9, 6.9, 2.5 micron
Enhanced feeders on the UltiMaker S7 move filament at a precise rate with an abrasive resistant feeder gear that's ready to print with composite materials. Flip the ergonomic locking lever to easily insert or remove your 3D printing materials.
Dual-geared feeder, reinforced for composite materials
The award-winning touchscreen gives you intuitive control over your setup and shows a preview of your print. Supported languages: English, Dutch, French, German, Italian, Japanese, Korean, Portuguese, Russian, Spanish, Simplified Chinese.
4.7-inch (11.9 cm) color touchscreen
Faster print core changes mean higher uptime and easier maintenance. The UltiMaker S7 comes with print cores for build (AA) and water-soluble support (BB) materials. A print core for abrasive composite materials (CC) is available separately.
Swappable print cores
Thanks to swappable print cores, you can quickly switch between different filaments and material-matching print cores. This results in higher uptime and easier maintenance of your 3D printer.
Dual extrusion print head with an auto-nozzle lifting system, swappable print cores, and flood detection.
Smaller nozzle diameters enable more detailed prints, large diameters reduce overall print time. This 3D printer ships with two AA 0.4 mm print cores and one BB 0.4 mm print core.
0.25 mm, 0.4 mm, 0.6 mm, 0.8 mm
The printer will notify you when the filter needs replacing (every 1,500 print hours - about once per year).
Replaceable EPA filter
The volume of air extracted per hour by the low-noise, brushless fan.
1 - 50 m³/h (35 m³/h nominal rate for most materials at 23 °C)
A wide nozzle temperature range means greater flexibility in the 3D printing material choice.
Up to 340 °C (644 °F)
The nozzle heat-up time relates to how fast you can start printing, as well as how fast it can melt the polymer filament.
< 2 minutes
Thanks to their quiet operation, Ultimaker 3D printers are suitable for use in the office, studio, or classroom environment.
< 50 dBA
The redesigned print head of the UltiMaker S7 uses a more accurate inductive sensor to scan the build plate at multiple points. It then compensates for any Z-axis offset by adjusting the height of your print's first layers.
Advanced active leveling with more accurate inductive sensors
Simply bend the build plate and your 3D printed parts pop off. PEI coating allows for excellent adhesion without glue or support structures. 25 magnets and 4 pins ensure it can be replaced effortless with one hand.
PEI-coated flexible steel build plate
The build plate heat-up time relates to how fast it can reach the print-ready temperature.
< 5 minutes (from 20 to 60 °C)
This Ultimaker 3D printer operates best in locations between these temperatures.
15 - 32 °C (59 - 90 °F)
This Ultimaker 3D printer can be safely stored or left inactive at these temperatures.
0 - 32 °C (32 - 90 °F)
UltiMaker Cura is our industry-leading slicing software that turns your 3D model into a file your printer can use. Use UltiMaker Digital Factory to manage printers and print jobs via your local network or the cloud.
UltiMaker Cura – print preparation software UltiMaker Digital Factory – All-in-one cloud-based print, printer and user management software
MacOS, Windows, and Linux
More plugins are available from Ultimaker Marketplace to make your 3D printing experience even easier.
SolidWorks, Siemens NX, Autodesk Inventor
An STL file is the most used file type for 3D printing. Nearly any 3D modeling software program is able to create these files.
UltiMaker Cura: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG Printable formats: G, GCODE, GCODE.gz, UFP
Print with one click via Wi-Fi or Ethernet connection from UltiMaker Cura or UltiMaker Digital Factory. Or export your print job to a USB stick.
Wi-Fi 2.4 & 5 GHz: IEEE 802.11a/b/g/n/ac LAN: Gigabit Ethernet USB: 2.0
CE, FCC, VPAT, RoHS, REACH, CB, BIS, KC, PSE, RCM, SRRC, MIC, NCC, Safe unattended professional use
Learn more about UltiMaker S7 safety and compliance.
