Georgia Connections Academy

Building a mobile maker space: part 2—up and rolling

Secondary educationTechnology

Last week we covered how pioneer Wendy Aracich received a grant to set up the Mobile MakerSpace at Georgia Connections Academy, a virtual charter school in Georgia. This week, she shares her story about purchasing equipment and training teachers.

So what exactly does a Mobile MakerSpace look like?  That's the question I had to ask myself once I began the project of bringing 3D printing technology to virtual students.  When we started this project, we knew we needed something that would be easy to transport and we also wanted a variety of printers that could be used by students and teachers of all levels.  We also knew we would need a way to store and transport the equipment.

Our original printer was a MakerBot Replicator 5, which we won back in 2015.  We've been using this printer for all of our school projects so far, and I have even traveled with it to area conferences to demonstrate what our school has been doing with the program.  While the MakerBot can be buggy at times, it has served us well over the past few years and is fairly easy to transport. To expand our MakerSpace, we purchased four MP Select Mini V2 3D printers. I love MP Mini because it’s easy to use and I have found it to be less intimidating for beginners.  Plus, the small size makes it perfect for transport.  While the MP Minis are great, I also wanted to have a printer that could accommodate larger and more complex projects.  For this, we purchased an Ultimaker 2+.

The Ultimaker 2+ is reserved for our more advanced students and will not travel as much as the smaller printers. Teachers will also be able to use the Ultimaker 2+ to print classroom aids and manipulatives. In addition to the printers, we purchased filament in every color of the rainbow, as well as five 3D pens, which will be used for smaller projects as well as with our younger students.

mobile makerspace 3
Georgia Connections Academy students recently took the Mobile MakerSpace on the road to the Georgia Educational Technology Conference, where they demonstrated for educators how we use 3D printing in a virtual high school.

To make our equipment truly mobile, we purchased two sets of rolling storage containers — specifically, the Remington 2-Piece Heavy Duty Rolling Storage Trunk Set, which I found on Amazon.  (The price is currently $115 for a set of two, but I have found that the price tends to fluctuate a lot; I was able to get ours for $58 for the pair.)  These storage containers are large enough that we can fit at least two printers along with spools of filament in each bin. We use saved styrofoam packing materials to pack everything in securely for transportation. I have also built binders that go in each bin, which contain manuals for the printers, including easy visual guides, and lesson resources.  

Once our equipment purchases were made, we had to start thinking about how we would implement and utilize the Mobile MakerSpace. A big goal of this project was to get teachers from all subject areas involved, because so far, I have been the only teacher to utilize 3D printing in our curriculum. I have found that many of our teachers were receptive to 3D printing, but just did not know where to start or how to incorporate it into their classes.

mobile makerspace 2
Containers can fit up to 3 small printers or one larger printer, along with filament rolls and supplies. Foam soundproofing material is added to the containers to ensure everything is packed in tight and securely for transport.

I began by offering training to our teachers that allows them to become “3D Printing Certified.” Once they earn this designation, they are able to check-out the printers for use in lessons. During the training, we talk about ideas and ways that printing can be utilized, and each teacher gets to load and unload filament and print a small model to help them get more comfortable with the 3D printing process. Once a teacher completes the initial certification training, I meet with them individually to discuss ideas and planning specific to their subject area. Once a teacher is ready to use the equipment, they are able to take the printers on the road to an in-person workshop (called “G-labs” at our school), or use the printers in live video lessons that students can access virtually. I was encouraged that the entire Science department and about half of the English department signed up right away to be trained. Teachers are currently working on ways to build 3D printing into their lessons, and I can already see the shift to more project-based learning occurring as a result.

Recently, we started a 3D Printing Innovator’s Club as a way to get student feedback on ideas and to pilot some of our projects with this smaller group. Currently, we have science students working on 3D modeled molecules, graphic design students converting logos designed in Inkscape into 3D models, and photography students using a 3D printed character to create a unique and collaborative photography series.

I am encouraged by the progress we have made so far, but there are still many details we are working to figure out.

  • How do we prioritize which teachers get to check out the equipment?

  • Do we limit how long a teacher gets to keep a printer or how many printers they can check out at a time?

  • How best do we manage student print jobs?

  • How do we encourage more teachers to use the MakerSpace?

  • How can we showcase student designs so they can be seen by the whole school?

These are things we are still working out, but our hope is that over the two-year implementation phase of this project, we will develop a solid process for managing and operating a MakerSpace that is truly mobile. Stay tuned!

Read more education blogs

    • Naturalis Biodiversity Center: Prehistoric prints, cutting-edge technology

      Naturalis Biodiversity Center: Prehistoric prints, cutting-edge technology

      Naturalis Biodiversity Center, the Netherlands’ national natural history museum, is using 3D printing to create both partial and full dinosaur skeletons for public display.

      • History
      • Informal learning
    • Ultimaker Met

      Bringing 3D printing to the Metropolitan Museum of Art

      Part of the mission from Ultimaker North America's Community team is to help educators get up and running with 3D printing and to help them find meaningful ways to integrate the technology into their curriculum while celebrating their successes. When we w

      • Secondary education
      • History
    • College of the Desert 3D printing club

      Feel the Action: Learn about how a college is changing lives in ways we can touch!

      A 3D printing club emerges at College of the Dessert to help make ideas accessible to all students

      • Special education
      • Technology
    • Testing Quadcopter

      How the tools we use influence the designs we make

      Michael Delaney writes about his iterative process of integrating electronics and 3D printing in his programmable quadcopter project.

      • Informal learning
      • Technology
    • Smithsonian Learning Lab

      3D printing as part of the Smithsonian Learning Lab

      Pioneer Christopher Sweeney shares the work he did with 3D printing and the Smithsonian Learning Lab to create collections of educational resources, organized and structured for teaching and learning.

      • Informal learning
      • Art
    • Harvard calculus courses use 3D printed models to engage students

      Harvard calculus courses use 3D printed models to engage students

      What is the best way to teach concepts like surface area and volume relating to mathematical objects in a three-dimensional world? The curricular design team at Harvard University thinks the...

      • University
      • Mathematics
    • Code your 3D designs with Tinkercad’s new Codeblocks app

      Code your 3D designs with Tinkercad’s new Codeblocks app

      Tinkercad released Codeblocks last June, and now that it's out of Beta, Pioneer Rob Morrill tells us how he uses it.

      • Informal learning
      • Technology
    • Mathematica Tea Light Holder

      3D Design in Mathematica: Tea Light Holders

      If it’s happening in Ultimaker’s world, you can find out about it here. 3D printing stories about inspiring moments, original 3D printed projects and much much more.

      • Informal learning
      • Mathematics
    • printingUltibot

      Modifying an STL with Tinkercad

      When Ultimaker Pioneer Alex Larson contacted me about the Ultibot-D project, I was super excited. As a teacher and parent, I am a huge cheerleader for risk. I printed the base models at ⅕ scale and gave it to my students to explore

      • Primary education
      • Technology
    • Ultimaker at Camp

      Math Camp: Having fun doing stuff

      Pioneer Dr Toni Szymanski writes about summer fun at camp with 4th and 5th graders, math, and 3D printing.

      • Primary education
      • Mathematics
    • 3D printing for glass

      GlitchCraft

      Guest blogger Astrida Valigorsky writes about combining the old and the new at Timothy Belliveau's GlitchCraft class where students combined 3D printing and glass blowing.

      • Informal learning
      • Technology
    • 3D printing in math and chemistry

      A unique 3D printing collaboration between mathematics and chemistry faculty

      Passing it on. After integrating 3D printing into her own math courses, Kristen Schreck helps spread 3D printing across disciplines at Saint Xavier University.

      • University
      • Science
    • basecampProject

      Using Basecamp to manage your classroom/makerspace projects and print queue

      Pioneer Andrew Woodbridge uses Basecamp to organize his students' projects, and he explains how you can too.

      • Secondary education
      • Technology
    • World monument project

      Living world monuments assignment

      Pioneer Joanne Barrett shares about a middle school project that combines 3D printing, Augmented Reality, History, and Art.

      • Secondary education
      • History
    • toni teaching fusion

      Teacher training for 3D printing

      Pioneer Dr. Toni Szymanski thought that 3D printing could engage students in math classes. To test this out, she had to learn all about 3D printing first.

      • Secondary education
      • Mathematics
    • Finland’s mobile libraries

      3D printers in the public library: Finland ahead of the curve

      US Professor Joshua Pearce, sponsored by Fulbright Finland for Research, shares his first impressions of Finnish libraries.

      • Informal learning
      • Technology
    • parts in cura (1)

      My reintroduction to Netfabb

      A recent NetFabb workshop convinced the writer that they can't live without this application. See why it's time to take another look at Netfabb.

      • Secondary education
      • Technology
    • buckeyball

      Modeling rocks at iCREATE

      iCREATE's Tiffany Huang shared an iCREATE success story about Jackie Zheng.

      • Secondary education
      • Science
    • goblet project

      Integrating 3D printing and The Goblet Project

      Pioneer Chris Hanusa shares one way he integrated 3D printing into his Integral Calculus class

      • University
      • Mathematics
    • Happiness

      Lessons in letting go - releasing student energy speeds creation and use of our art and innovation lab

      Pioneer John Nordell enlisted his students to put the Art and Innovation Lab together. The result was one of the best experiences he has had as an educator.

      • University
      • Technology
    • hero wrenchs

      Wrench Engineering

      Inspired by NASA printed in space wrench, Pioneer Rob Morrill gave his fifth graders a design challenge to design their own real-world tool.

      • Primary education
      • Engineering
    • ceramic stamps

      Digital fabrication informs ceramics decorative process

      Pioneer Young Kim blends his classical arts background with digital fabrication to create a ceramic project that incorporates 3D printing.

      • Secondary education
      • Art
    • Empathy map

      Elementary-College Engineering Design partnership

      Pioneer Matthew Wigdahl writes about how his fifth graders and local undergraduate engineering students learn from each other.

      • Primary education
      • Engineering
    • 014-SchoolHero

      Introducing Ultimaker’s Core Lessons Set for STEAM Educators

      Designed by the Ultimaker North America Community Team, our new Core Lessons: STEAM Set is a resource for educators who need inspiration and ideas when they bring 3D printing into their classrooms.

      • Primary education
      • Technology
    • MakerGirl

      Empower one MakerGirl, empower the world

      how the group traveled 10,000 miles around the country to help bring 3D printing workshops to over 1,000 young girls. In this week's post we catch up with the organization that is still working to create a new generation of confident, creative women leade

      • Primary education
      • Technology
    • Georgia Connections Academy

      Building a mobile maker space: part 2—up and rolling

      So what exactly does a Mobile MakerSpace look like? That's the question I had to ask myself once I began the project of bringing 3D printing technology to virtual students. When we started this project, we knew we needed something that would be easy to

      • Secondary education
      • Technology
    • Building a mobile makerspace: part 1— getting started

      Building a mobile makerspace: part 1— getting started

      Pioneer Wendy Aracich is putting together and implementing a mobile MakerSpace for her virtual school of 4000 students spread across the state of Georgia.

      • Secondary education
      • Technology
    • coca cola upcycle

      Upcycling community project

      Upcycling challenges students and educators to use their creativity and 3D printing skills to breathe new life into a few familiar objects.

      • Informal learning
      • Technology
    • LibraryLyna

      Tactile Problem/Solution Bank Community Project

      3D modeling and printing should be accessible of every educator so that they may offer their students tactile means to understand spatial concepts.

      • Secondary education
      • Languages
    • pecha-kuchas

      Construct3D to Kamehameha Ed Tech Conference

      Last year Pioneer Greg Kent traveled from Hawaii to North Carolina to attend Construct3D 2017. We thought we'd share his reflections with you now since we recently announced Construct3D 2018

      • Secondary education
      • Technology
    • Plastic Ocean by Kevin Krejci

      Ocean Plastic Community Project

      The Ultimaker Community Team will be launching a series of interdisciplinary projects over the next few months that challenge students to research, explore, design, and 3D print. Ocean Plastic is the first project of this series.

      • Secondary education
      • Geography
    • Design Engine Box

      Design Engine community project

      We want to challenge educators and students to help evolve the Design Engine game. We want to see how you're using or modifying the game with your students, and we want to incorporate your ideas into the next edition.

      • Informal learning
      • Technology
    • Drone1

      Using drones and 3D printing to develop design thinking during a summer robotics camp

      Pioneer Yuriy Drubinskiy writes about his experience leading a summer program and how creating drones with 3D printing brings form, structure, and design together.

      • Secondary education
      • Technology
    • fractal2

      3D printed fractals at JMU 3SPACE

      Pioneer Professor Laura Taalman, (a.k.a. mathgrrl), reviews a multi-week study of fractals by general education math students in the JMU 3D printing classroom.

      • University
      • Mathematics
    • The Starter Pack launch event at Digital Harbor Foundation

      Introducing the Ultimaker Design Engine Starter Pack

      Presenting the Ultimaker Design Engine Starter Pack: a game created to provoke, inspire, and entertain students, educators, 3D designers, artists, and engineers of all experience levels!

      • Informal learning
      • Technology
    • first puzzle cube and package to be made on a 3D printer entirely out of PLA

      Davidson Desktop Doohickeys: Puzzle cubes

      Pioneer Adam Davidson writes about a project in his curriculum that is a rite of passage for his high school's engineering program students. He explains at how it started and what caused it to change

      • Secondary education
      • Engineering
    • soft robot mold

      3D printing with UMaine Bioengineering students

      If it’s happening in Ultimaker’s world, you can find out about it here. 3D printing stories about inspiring moments, original 3D printed projects and much much more.

      • University
      • Science
    • Star Wars and STEAM

      3D printing, Arduino, and Star Wars: A guide to K-12 STEAM engagement

      If it’s happening in Ultimaker’s world, you can find out about it here. 3D printing stories about inspiring moments, original 3D printed projects and much much more.

      • Secondary education
      • Technology
    • Cam-ball-launcher

      Nautilus cam ball launcher

      Design process is about discovery through iteration. Pioneer Brad Whitehead describes how his FTC robotics team learned this while working on a unique ball launcher.

      • Special education
      • Technology
    • 3D-printed molecules

      3D printable molecular models

      Tandy Grubbs, Professor of Chemistry, writes about how chemistry students at Stetson University are taking advantage of 3D printing to better visualize the molecular world.

      • University
      • Science
    • animal adaptations

      Animal Adaptations

      If it’s happening in Ultimaker’s world, you can find out about it here. 3D printing stories about inspiring moments, original 3D printed projects and much much more.

      • Primary education
      • Technology
    • Launching water rockets

      3D water rockets

      Pioneer Tim Cooper explains what to do with a First Lego League team in the off season when they love rockets and 3D printing.

      • Primary education
      • Science
    • Three reasons for open source tech in your 3D printing classroom

      Three reasons for open source tech in your 3D printing classroom

      Pioneer Joshua Pearce explains why educators should consider using free and open source options in and out of the 3D printing classroom.

      • University
      • Technology
    • 3D printing artifacts

      3D printing artifacts from the Penn Museum

      The chance to hold a 3D printed historical artifact in our hands is one of the greatest ways to boost students' engagement with science, engineering, and culture. Learn how challenging and exciting it can really be.

      • Secondary education
      • History
    • UTEP Lab

      Managing an open 3D printing lab

      What’s it like to be a student administrator for a 3D printing lab space? What kind of knowledge and experiences could you offer to students at your own school by hiring them for such position?

      • University
      • Engineering
    • 3D printing in the classroom

      Why I use 3D printing in the classroom (and why you should too!)

      While 3D printing is not new to designers, engineers and other professionals in need of rapid prototyping tools, it is still a new and exciting technology for our students. Pioneer Grace Bennett shares why teachers should get started with 3D printing.

      • Secondary education
      • Technology
    • 3D printed whistles

      Thinking about the environment

      The learning curve associated with 3D printing can produce a lot of 3D printed waste. It's time to start exploring and thinking about more sustainable options.

      • Informal learning
      • Geography
    • 3D printed Cryptex puzzle

      #1 reason to love math: 3D printed puzzles

      Pioneer Andreas Kaiser writes about the power of puzzles in the classroom and how recreating or designing puzzles is a perfect fit for his engineering students.

      • Secondary education
      • Mathematics
    • 3D printing in Multivariable Calculus

      Our 3D printing journey in Multivariable Calculus

      Here’s a story of the next generation of 3D printing pioneers exploring the 3D printing technology in Multivariable Calculus with the Ultimaker 2+.

      • University
      • Mathematics