World monument project

Living world monuments assignment

  • Secondary education
  • History

Pioneer Joanne Barrett shares a middle school project that combines 3D printing, augmented reality, history, and art.

Our middle school seventh-grade world history curriculum starts the year with units about Minoan and the Mycenaean civilizations. In past years students were asked to research and write traditional reports on monuments with the typical research skills as learning objectives of the unit. Last year we added a new twist to the project by adding a 3D printing component. Like previous years, students were paired up and assigned a monument to research, such as Alhambra, Diocletian’s Palace, or Bran Castle. Previously, the project required students to work on research skills, like browser search strategies, using their media center NoodleTool accounts, and being introduced to resources with the school’s librarian. This past year, we added a new component, an introduction to 3D printing, as a majority of the students came to the project with no previous printing experience.

Through our discussions and by showing examples, we introduced students to the three basic methods that can be used to obtain models for 3D printing: scanning, searching, and creating. When we launched this project, it was early in the year, and students were excited about the possibility of learning how to create their own 3D files. Since this was a research project, we decided that having students find existing STL files for 3D printing would be a challenge that augmented their research. We worked with the students and provided resources for them to help with their searches. In many cases, the students were able to find existing models for their exact monuments. When there were no models of a monument available, students were encouraged to become creative and to find something that they felt represented their historical structure. For example, for Bran Castle, one student printed a small bust of Bram Stoker's Dracula by jaystein.

Bran Castle by uTechLab and Bram Stoker's Dracula by jaystein

Once students completed their research they had to turn in to their teacher a script of their presentation for review and their STL files. The STL files had to be transferred to the technology office to be prepared for printing. In our middle school, we use Google Apps for Education (GAFE) so students share the files to be printed because they are not yet given free access to 3D printers. Upon approval, students recorded short videos about their monuments.

Somewhere along the way, we decided that we wanted to make this a true STEAM project, so we enlisted the assistance of the Art teacher. In art class, the students created a large map to be posted on the classroom wall. Initially, it was traced in black marker and the students colored it in with pencils. Once the colored map was placed on the wall, we adhered the printed artifacts to it with 3M Command damage-free hanging strips. We chose this so that the artifacts could easily be removed and placed back on the wall.

The final phase of the project was originally designed to include some augmented reality. The idea was to use pictures of the artifacts on the map as trigger images. Then using an augmented reality map we wanted to link the static images to the videos that were recorded of the students presenting their oral reports. While this sounded like it would be fairly straightforward, it turned out to be rather tricky. The biggest obstacle we faced was that the augmented reality application we chose, having used it before for other projects (Aurasma), was sold and absorbed by another company. In the transition phase, some of the features of the website did not function as well as they previously had and it was hard to tell when there was a problem with our school’s bandwidth or the app's relocating servers! For example, eight images were uploaded one day and the connection froze, and upon reboot, all of the previously saved images were gone. This delayed our being able to complete the finished product. Once the dust settled and the transition to the new HP Reveal app service was completed, the app became more stable and we were able to finally upload a fair portion of the videos to trigger on the artifacts, and students were able to visit some of their work from earlier in the year.

It turned out that the map of artifacts is pretty neat. The students enjoyed seeing their work posted and “come to life” on the map. Having some of the videos trigger with the augmented reality application was a nice bonus, and we are hoping that next year when we try this assignment again, the app will be more stable and we can get the results we were hoping for sooner. Overall, it was a fun learning experience for teachers and students about the challenges of new and evolving technologies in our classrooms!

world map

Read more education blogs

  • College of the Desert 3D printing club

    Feel the Action: Learn about how a college is changing lives in ways we can touch!

    A 3D printing club emerges at College of the Dessert to help make ideas accessible to all students

    Testing Quadcopter

    How the tools we use influence the designs we make

    Michael Delaney writes about his iterative process of integrating electronics and 3D printing in his programmable quadcopter project.

    Ultimaker Met

    Bringing 3D printing to the Metropolitan Museum of Art

    Part of the mission from Ultimaker North America's Community team is to help educators get up and running with 3D printing and to help them find meaningful ways to integrate the technology into their curriculum while celebrating their successes. When we w

  • Smithsonian Learning Lab

    3D printing as part of the Smithsonian Learning Lab

    Pioneer Christopher Sweeney shares the work he did with 3D printing and the Smithsonian Learning Lab to create collections of educational resources, organized and structured for teaching and learning.

    Harvard calculus courses use 3D printed models to engage students

    Harvard calculus courses use 3D printed models to engage students

    What is the best way to teach concepts like surface area and volume relating to mathematical objects in a three-dimensional world? The curricular design team at Harvard University thinks the...

    Mathematica Tea Light Holder

    3D Design in Mathematica: Tea Light Holders

    If it’s happening in Ultimaker’s world, you can find out about it here. 3D printing stories about inspiring moments, original 3D printed projects and much much more.

  • Code your 3D designs with Tinkercad’s new Codeblocks app

    Code your 3D designs with Tinkercad’s new Codeblocks app

    Tinkercad released Codeblocks last June, and now that it's out of Beta, Pioneer Rob Morrill tells us how he uses it.


    Modifying an STL with Tinkercad

    When Ultimaker Pioneer Alex Larson contacted me about the Ultibot-D project, I was super excited. As a teacher and parent, I am a huge cheerleader for risk. I printed the base models at ⅕ scale and gave it to my students to explore

    Ultimaker at Camp

    Math Camp: Having fun doing stuff

    Pioneer Dr Toni Szymanski writes about summer fun at camp with 4th and 5th graders, math, and 3D printing.

  • 3D printing for glass


    Guest blogger Astrida Valigorsky writes about combining the old and the new at Timothy Belliveau's GlitchCraft class where students combined 3D printing and glass blowing.


    Using Basecamp to manage your classroom/makerspace projects and print queue

    Pioneer Andrew Woodbridge uses Basecamp to organize his students' projects, and he explains how you can too.

    3D printing in math and chemistry

    A unique 3D printing collaboration between mathematics and chemistry faculty

    Passing it on. After integrating 3D printing into her own math courses, Kristen Schreck helps spread 3D printing across disciplines at Saint Xavier University.

  • World monument project

    Living world monuments assignment

    Pioneer Joanne Barrett shares about a middle school project that combines 3D printing, Augmented Reality, History, and Art.

    parts in cura (1)

    My reintroduction to Netfabb

    A recent NetFabb workshop convinced the writer that they can't live without this application. See why it's time to take another look at Netfabb.

    hero wrenchs

    Wrench Engineering

    Inspired by NASA printed in space wrench, Pioneer Rob Morrill gave his fifth graders a design challenge to design their own real-world tool.

  • goblet project

    Integrating 3D printing and The Goblet Project

    Pioneer Chris Hanusa shares one way he integrated 3D printing into his Integral Calculus class

    Finland’s mobile libraries

    3D printers in the public library: Finland ahead of the curve

    US Professor Joshua Pearce, sponsored by Fulbright Finland for Research, shares his first impressions of Finnish libraries.


    Lessons in letting go - releasing student energy speeds creation and use of our art and innovation lab

    Pioneer John Nordell enlisted his students to put the Art and Innovation Lab together. The result was one of the best experiences he has had as an educator.

  • toni teaching fusion

    Teacher training for 3D printing

    Pioneer Dr. Toni Szymanski thought that 3D printing could engage students in math classes. To test this out, she had to learn all about 3D printing first.

    ceramic stamps

    Digital fabrication informs ceramics decorative process

    Pioneer Young Kim blends his classical arts background with digital fabrication to create a ceramic project that incorporates 3D printing.


    Modeling rocks at iCREATE

    iCREATE's Tiffany Huang shared an iCREATE success story about Jackie Zheng.

  • Empathy map

    Elementary-College Engineering Design partnership

    Pioneer Matthew Wigdahl writes about how his fifth graders and local undergraduate engineering students learn from each other.


    Introducing Ultimaker’s Core Lessons Set for STEAM Educators

    Designed by the Ultimaker North America Community Team, our new Core Lessons: STEAM Set is a resource for educators who need inspiration and ideas when they bring 3D printing into their classrooms.


    Empower one MakerGirl, empower the world

    how the group traveled 10,000 miles around the country to help bring 3D printing workshops to over 1,000 young girls. In this week's post we catch up with the organization that is still working to create a new generation of confident, creative women leade

  • Georgia Connections Academy

    Building a mobile maker space: part 2—up and rolling

    So what exactly does a Mobile MakerSpace look like? That's the question I had to ask myself once I began the project of bringing 3D printing technology to virtual students. When we started this project, we knew we needed something that would be easy to

    Building a mobile makerspace: part 1— getting started

    Building a mobile makerspace: part 1— getting started

    Pioneer Wendy Aracich is putting together and implementing a mobile MakerSpace for her virtual school of 4000 students spread across the state of Georgia.


    Tactile Problem/Solution Bank Community Project

    3D modeling and printing should be accessible of every educator so that they may offer their students tactile means to understand spatial concepts.

  • Design Engine Box

    Design Engine community project

    We want to challenge educators and students to help evolve the Design Engine game. We want to see how you're using or modifying the game with your students, and we want to incorporate your ideas into the next edition.

    coca cola upcycle

    Upcycling community project

    Upcycling challenges students and educators to use their creativity and 3D printing skills to breathe new life into a few familiar objects.


    Construct3D to Kamehameha Ed Tech Conference

    Last year Pioneer Greg Kent traveled from Hawaii to North Carolina to attend Construct3D 2017. We thought we'd share his reflections with you now since we recently announced Construct3D 2018

  • Plastic Ocean by Kevin Krejci

    Ocean Plastic Community Project

    The Ultimaker Community Team will be launching a series of interdisciplinary projects over the next few months that challenge students to research, explore, design, and 3D print. Ocean Plastic is the first project of this series.


    3D printed fractals at JMU 3SPACE

    Pioneer Professor Laura Taalman, (a.k.a. mathgrrl), reviews a multi-week study of fractals by general education math students in the JMU 3D printing classroom.


    Using drones and 3D printing to develop design thinking during a summer robotics camp

    Pioneer Yuriy Drubinskiy writes about his experience leading a summer program and how creating drones with 3D printing brings form, structure, and design together.

  • The Starter Pack launch event at Digital Harbor Foundation

    Introducing the Ultimaker Design Engine Starter Pack

    Presenting the Ultimaker Design Engine Starter Pack: a game created to provoke, inspire, and entertain students, educators, 3D designers, artists, and engineers of all experience levels!

    first puzzle cube and package to be made on a 3D printer entirely out of PLA

    Davidson Desktop Doohickeys: Puzzle cubes

    Pioneer Adam Davidson writes about a project in his curriculum that is a rite of passage for his high school's engineering program students. He explains at how it started and what caused it to change

    soft robot mold

    3D printing with UMaine Bioengineering students

    If it’s happening in Ultimaker’s world, you can find out about it here. 3D printing stories about inspiring moments, original 3D printed projects and much much more.