Jabil TPE SEBS 1300 95A

Jabil significantly extends the applications for additive manufacturing by delivering innovative materials with enhanced properties – increased strength, flame retardancy, conductivity, and lubrication – allowing manufacturers to take advantage of new opportunities.

TPE SEBS 1300 95A is an elastomeric material with good rubber-like properties, similar to TPU but with much easier printability and consistency. TPE SEBS low moisture absorption makes printing and materials handling much simpler.

Material properties include:

• Melt Temperature (°C), test condition: +/- 20°C/min. ramp, typical value: 165, method: DSC

• Density (g/cm3), test condition: ambient, typical value: 1.053, method: ASMT D792

• Tensile Modulus MPa, XY coupons, Ambient, typical value: 93, method: ASTM D638, Type IV

• Tensile Elongation at Break (%), XY coupons, Ambient, typical value: 780, method: ASTM D638, Type IV

• For full material properties, refer to the technical and safety data sheets

Find out which Ultimaker 3D printers are compatible with TPE SEBS 1300 95A in the Ultimaker Marketplace.