110° C

The physical space inside the Method X Carbon Fiber Edition that can be used when dual extrusion 3D printing.

The physical space inside the Method X Carbon Fiber Edition that can be used when 3D printing with a single extruder.

The 3D printer's outer dimensions,

This is the process of depositing layers of filament, one on top of the other, to build up shapes and models. It is a form of additive manufacturing technology and the process used by all UltiMaker 3D printers.

The filament diameter that achieves optimal results on UltiMaker Method series 3D printers.

The net weight of the 3D printer.

A micron is the measurement used to define the thickness of a 3D printed layer. 20 micron is 0.02 mm thick. Thinner layers are used for high-detail prints, thicker layers are great for fast prototypes.

The touchscreen allows you to start, stop, and monitor prints on your Method series printer. As well as allowing you to calibrate your printer and install firmware updates without needing to use a computer or other device.

Faster extruder changes mean higher uptime and easier maintenance. The Method X Carbon Fiber Edition comes with 1C, 2A, and 2XA extruders for printing polymers, composites, and soluble support materials. The Labs extruder is sold separately for printing 3rd part materials.

Thanks to swappable extruders, you can quickly switch to the extruder that matches the material you are trying to print. This results in higher uptime and easier maintenance of your 3D printer.

The nozzel diameter controls how much material can be extruded at once. All Method series extruders have 0.4 mm nozzles.

The thermally regulated heated chamber is able to rise to the target temp and stay there for the duration of the print ensuring an optimal print environment.

The extruder temperature varies by which material is being printed. The high max temperature available on the Method series of printers allows for printing with high-temp materials.

The operating sound will vary at different stages of a print.

Simply bend the build plate and your 3D printed parts pop off. Replacement build surfaces are available if the surface of your build plate becomes damaged.

The peak power draw that the printer can reach – usually when the heated bed and hot ends are heating up.

UltiMaker CloudPrint is the slicing and printer management software that allows for an intuitive workflow from digital file to final part.
UltiMaker Cura: Local printing, 600+ settings, and more are available for the first time when using a Method series printer

Print with one click via Wi-Fi or Ethernet connection from UltiMaker CloudPrint. Or export your print job to a USB stick.