Achieve a new level of print success
Independently tested to remove up to 95% of ultrafine particles from every print.* Not only does this increase air quality peace of mind... It also boosts print quality thanks to its fully enclosed build chamber and single glass door.
*Tested by Fraunhofer WKI. Only including UltiMaker materials.
Skip using glue and remove parts effortlessly with the PEI-coated flexible build plate. 25 magnets and 4 alignment pins allow you to replace it perfectly – reducing the time spent using the UltiMaker S7 and increasing productivity.
A new inductive print head sensor probes the build plate with less noise and more accuracy. And automatic tilt compensation removes the need for thumbscrew bed calibration. Together, these allow you to start a print and walk away – confident in a perfect first layer.
By adding the Material Station to the UltiMaker S7, you gain 6 front-loading spool bays, plus automatic humidity control and material handling. This saves operator time, while increasing print success rate and quality.
UltiMaker Essentials gives you the tools you need to start 3D printing at work, while meeting IT requirements. Features include remote printer management, firmware firewalls, verified plugins, and direct support.
The physical space inside the UltiMaker S7 that can be used for single or dual extrusion 3D printing.
330 x 240 x 300 mm
(13 x 9.4 x 11.8 inches)
The XYZ 3D printer dimensions, including the spool holder.
495 x 585 x 800 mm
(19.5 x 23 x 31.5 inches)
This is the process of depositing layers of filament, one on top of the other, to build up shapes and models. It is a form of additive manufacturing technology and the process used by all Ultimaker 3D printers.
Fused filament fabrication (FFF)
The filament diameter that achieves optimal results on Ultimaker 3D printers.
The net weight of the 3D printer.
29.1 kg (64.2 lbs)
The peak power output that the printer can reach – usually when the heated bed and hot ends are heating up.
The UltiMaker S7 gives you access to the entire Ultimaker ecosystem, including:
• UltiMaker Essentials (unending enterprise software subscription)
• UltiMaker Cura (full settings and monitoring compatibility)
• UltiMaker Digital Factory (remote printing and management)
• UltiMaker 3D Printing Academy (e-learning modules)
• A global network of service partners (setup and training)