Ultimaker PVA Removal Station next to 3D printed parts

Ultimaker PVA Removal Station

Simple post-processing. Faster parts

Make printing complex designs faster and easier. The Ultimaker PVA Removal Station dissolves support material quickly and effectively, keeping operator time to a minimum and increasing productivity.

Available in select European countries only. Available worldwide: Summer 2022

ラピッドプロトタイピングをより速く、より簡単に

Dissolves PVA up to 4x faster¹

Less post-processing operator time¹

Use with Ultimaker or 3rd-party PVA

Just add water. No chemicals, no mess

3Dプリント部品が中に入ったPVA Removal Station

Remove PVA up to 4x faster

Shrink your post-processing time

High-speed water circulation driven by a magnetic rotor removes PVA up to four times faster than motionless water, even from hard-to-reach cavities. So you have your parts post-processed and ready to use as soon as possible.

PVA Removal Station operation

労力を軽減し、生産性を改善

オペレーターの作業時間を最大80%短縮¹

Ultimaker PVA Removal Stationでは、部品ごとに必要なオペレーターの作業時間はわずか数分で、メンテナンスの必要性も最小限です。スタートボタンを押して作業を任せ、完了したら部品を回収するだけです。

主な機能

    Technical specifications

    Container volume

    13.7 liters (3.6 US gal)

    Maximum part size

    200 x 230 x 165 mm
    (7.8 x 9 x 6.4 in)

    Supported materials

    Optimized for: PLA and PVA 
    Also suitable for: PETG, Tough PLA, Nylon, or CPE in combination with PVA 
    (Also supports equivalent third-party materials) 

    Supported solvents

    Water

    Rotor speed

    225 RPM (normal)
    100 RPM (low)

    Operating sound

    < 50 dBA 

    設計からプリントまでのワークフローをシンプルに

    PVA Removal Stationの使用は簡単3ステップ

    PVA Removal Station docking system

    Fill

    Fill the container with tap water, place it back on the docking station, and place your 3D print inside.

    お近くの販売店を探す

    世界各地で提供開始:2022年夏

        Ultimaker S5 Pro Bundle more than just a 3D printer

        Transform your business

        With the Ultimaker 3D printing platform

        Ultimaker 3D printers give you access to the entire Ultimaker ecosystem, including:

        • Ultimaker Essentials (unending enterprise software subscription)

        • Ultimaker Cura (full settings and monitoring compatibility)

        • Ultimaker Digital Factory (remote printing and management)

        • Ultimaker 3D Printing Academy (e-learning modules)

        • A global network of service partners (setup and training)

        ¹ Compared with dissolving PVA in motionless water in an improvised container
        ² Times may differ and increase this range depending on the size and density of the support structure
        ³ PVA is a biodegradable material. In most cases the water can be disposed of down the drain, providing the waste water distribution network is connected to a wastewater treatment plant. We recommend you check local regulations for more guidance