Diese Seite wird auf Englisch angezeigt, da Sie in der von Ihnen gewählten Sprache nicht verfügbar ist.

soft robot mold-1

3D printing with UMaine Bioengineering students

  • University
  • Science

Dr. Sara Walton is a lecturer in the department of chemical and biological engineering at the University of Maine. In this article, she shares some projects from students who have used 3D printing for their Senior Capstone projects to solve real-world problems.

Talk of adding a 3D printing/computer aided design software lab into the bioengineering curriculum at the University of Maine began in 2014, around the same time that I joined the faculty. The industrial advisory board had cited this as a key skill they thought students should learn - and I was assigned to figure out how to make this happen. At that point, I had no experience with either CAD or 3D printing, and only a few weeks head-start on the students to learn these skills before the semester began.

In the first year iteration, we had students designing microfluidic mixing devices which we printed in the New Media department on their 3D printer. Reviewing after the first year, I realized that the assignment wasn’t presenting enough challenge in CAD creation to really develop this skill set, and also that using machines in another department didn’t encourage the students to have much involvement with the process of 3D printing itself.

For the second year iteration, I got approval to purchase a 3D printer of our own---and spent weeks reading product reviews before finally settling on the Ultimaker 2. I changed the assignment to the creation of 3D printed prosthetic hands, inspired by the e-nable foundation. Students were allowed to take inspiration from the open source community, but in order to develop their CAD skills, they had to design all of the pieces themselves.

prosthetic hand
This is a SolidWorks assembly image from one of the student-created hands.

The complexity of this project was a greater challenge, and our students were now proficient enough in SolidWorks to make good use of the CAD software in their senior capstone projects.

Senior capstone project teams in the Bioengineering department are each assigned a problem from an industry sponsor, and the team builds a prototype device to demonstrate their solutions. The projects for the class of 2017 that involved 3D printed components included a pediatric breathing simulator, a soft robot, an ultrasonic mosquito larvae exterminator, a blood hemolysis detector, and a cell scratch assay device for wound healing studies.

Pediatric breathing simulator

The pediatric breathing simulator is a medical manikin that can be used in training healthcare professionals to recognize normal or distressed breathing patterns in children. The lungs and diaphragm compartments within this model were 3D printed using the Ultimaker. An air compressor supplies air flow through series of pressure regulators, tubing and solenoid pinch valves. A LabView program is used to select the desired breathing mode (normal, seesaw, respiratory distress or collapsed lungs). A video of the device in operation can be seen here.

breathing 2
View of medical manikin, including lungs and diaphragm.
breathing 3
LabView program interface

Soft robot

Soft robots are a new class of machines bio-inspired by the compliance of living tissue, as exemplified by organisms such as octopi which can change their shape and size to meet the needs of their environment. The ability to deform upon contact has relatively recently been recognized as a highly useful feature for robots, particularly when it comes to the performance of delicate tasks such as handling fragile objects or interfacing with human tissues.

The foundation of soft robotics is the use of compliant materials which can be deformed through the introduction of air or water into an interior channel system. Silicone polymers (elastomers) are currently the material of choice for the creation of soft robotic actuators, as they are easily formable into the necessary geometries for actuation and can be tuned to give the correct stiffness for actuation.

SLIPS Technologies, Inc. (STI) is the sole manufacturer and distributor of a new class of self-cleaning silicone polymer. When combined with soft robotics, this system could permit new applications of soft robots in potentially high-fouling environments, including digestive tract surgery or marine applications, in which the robot “skins” remain clean throughout use. However, the slippery nature of these polymers make the use of standard soft robot designs difficult to use. The object of this project was to design a simple soft robot that would work with STI's slippery polymer.

soft robot mold (1)
Soft robot mold.

The Larva Blaster 3000

The Eastern Equine Encephalitis Virus (EEEV) is an emerging human and veterinary health threat in northern New England and is primarily transmitted through mosquitoes (Culiseta melanura). Cs melanura mosquitoes are unique in that their larvae remain alive over the winter months, hidden in un-frozen water-filled pockets called crypts, located under the roots of trees. This survival strategy makes traditional methods of controlling mosquitoes, such as the application of pesticides or draining water bodies, more difficult. The objective of this project was to design and prototype a device for destroying mosquito larvae in the crypts, particularly during the colder winter months.

The device should not be harmful to the surrounding plants or animals. This device was created for the Lyme & Vector-Borne Disease Laboratory at the Maine Medical Research Institute. The Larva Blaster 3000 is an ultrasonic mosquito larvae reduction device created by the capstone students.The probe head and device casing were 3D printed.

larva blaster 3000
The probe head houses the ultrasonic transducers and a water sensor.
Crypts where mosquito larvae might be found
Larva blaster

A flexible cable attaches to the device housing, which contains an Arduino microcontroller, breadboard, battery, and three LED lights which illuminate if (1) the water sensor detects water, (2) the transducer is too close to an object for effective use, or (3) indicating the device itself is powered on.

Cell scratch device for wound repair research

The Rieger group at Mount Desert Island Biological Laboratory studies wound repair mechanisms in zebrafish and human keratinocyte cell lines. They have discovered that low concentrations of the small reactive oxygen species hydrogen peroxide (H2O2) stimulate keratinocyte migration whereas high levels are inhibitory. To further assess H2O2-dependent migration mechanisms in human keratinocytes, they need to perform scratch assays.

A typical scratch assay is performed by letting the cells grow to a confluent state in a 24 or 48-well glass bottom multiwell plate, and making a 100-200µm scratch in three separate regions of each well. Scratch closure is thereafter observed over time. They have performed scratching so far with a pipette tip, which requires that the scratch width must be measured immediately after scratching to be able to quantify the closure distance. This requires that the initial scratches be imaged in a light microscope, which can be a substantial burden. In order to avoid this extra step, a device must be designed that can make such precise scratches that no initial imaging or measuring has to be performed.

cell scratcher
This is part of the prototype cell scratcher device. The corner pieces, well-plate holder, and central assembly are all 3D printed.
cell scratcher 2
Raised and lowered views of the cell scratching device.

Hemolysis detector

Hemoglobin is essential for the transport of oxygen in the bloodstream. Under normal conditions, it is contained within erythrocytes (red blood cells). Under pathological states, hemoglobin may be released into the bloodstream due to erythrocyte cell lysis. It is then broken down into hemin and heme, which is toxic to cells.

Diseases in which free heme plays a role in detrimental health effects include sepsis, thrombosis, sickle cell disease, renal failure and liver failure. The objective of this project was to develop a method for detecting high levels of free hemoglobin in blood samples in a hand-held testing device that is relatively cheap and easy to use. The client for this project was Instrumentation Laboratories of Bedford, MA.

The capstone project device consists of a blood plasma separator and an optical detector. The plasma separator uses a microfluidic system to isolate plasma from red blood cells. Free hemoglobin remains in the plasma, permitting efficient detection using a photoresistor and LED to determine the concentration of free hemoglobin. A second option for optical analysis using a mobile phone camera was also provided.

plasma 1
Schematic of initial blood separation process using the microfluidic device
The glass slide capillary tube can be inserted into either analysis device (left) optical analysis chamber, or (right/bottom) cell phone filter attachment.

Senior capstone team project user manuals

Read more education blogs

  • College of the Desert 3D printing club

    Feel the Action: Learn about how a college is changing lives in ways we can touch!

    A 3D printing club emerges at College of the Dessert to help make ideas accessible to all students

    Testing Quadcopter

    How the tools we use influence the designs we make

    Michael Delaney writes about his iterative process of integrating electronics and 3D printing in his programmable quadcopter project.

    Ultimaker Met

    Bringing 3D printing to the Metropolitan Museum of Art

    Part of the mission from Ultimaker North America's Community team is to help educators get up and running with 3D printing and to help them find meaningful ways to integrate the technology into their curriculum while celebrating their successes. When we w

  • Smithsonian Learning Lab

    3D printing as part of the Smithsonian Learning Lab

    Pioneer Christopher Sweeney shares the work he did with 3D printing and the Smithsonian Learning Lab to create collections of educational resources, organized and structured for teaching and learning.

    Harvard calculus courses use 3D printed models to engage students

    Harvard calculus courses use 3D printed models to engage students

    What is the best way to teach concepts like surface area and volume relating to mathematical objects in a three-dimensional world? The curricular design team at Harvard University thinks the...

    Mathematica Tea Light Holder

    3D Design in Mathematica: Tea Light Holders

    If it’s happening in Ultimaker’s world, you can find out about it here. 3D printing stories about inspiring moments, original 3D printed projects and much much more.

  • Code your 3D designs with Tinkercad’s new Codeblocks app

    Code your 3D designs with Tinkercad’s new Codeblocks app

    Tinkercad released Codeblocks last June, and now that it's out of Beta, Pioneer Rob Morrill tells us how he uses it.


    Modifying an STL with Tinkercad

    When Ultimaker Pioneer Alex Larson contacted me about the Ultibot-D project, I was super excited. As a teacher and parent, I am a huge cheerleader for risk. I printed the base models at ⅕ scale and gave it to my students to explore

    Ultimaker at Camp

    Math Camp: Having fun doing stuff

    Pioneer Dr Toni Szymanski writes about summer fun at camp with 4th and 5th graders, math, and 3D printing.

  • 3D printing for glass


    Guest blogger Astrida Valigorsky writes about combining the old and the new at Timothy Belliveau's GlitchCraft class where students combined 3D printing and glass blowing.


    Using Basecamp to manage your classroom/makerspace projects and print queue

    Pioneer Andrew Woodbridge uses Basecamp to organize his students' projects, and he explains how you can too.

    3D printing in math and chemistry

    A unique 3D printing collaboration between mathematics and chemistry faculty

    Passing it on. After integrating 3D printing into her own math courses, Kristen Schreck helps spread 3D printing across disciplines at Saint Xavier University.

  • World monument project

    Living world monuments assignment

    Pioneer Joanne Barrett shares about a middle school project that combines 3D printing, Augmented Reality, History, and Art.

    parts in cura (1)

    My reintroduction to Netfabb

    A recent NetFabb workshop convinced the writer that they can't live without this application. See why it's time to take another look at Netfabb.

    hero wrenchs

    Wrench Engineering

    Inspired by NASA printed in space wrench, Pioneer Rob Morrill gave his fifth graders a design challenge to design their own real-world tool.

  • goblet project

    Integrating 3D printing and The Goblet Project

    Pioneer Chris Hanusa shares one way he integrated 3D printing into his Integral Calculus class

    Finland’s mobile libraries

    3D printers in the public library: Finland ahead of the curve

    US Professor Joshua Pearce, sponsored by Fulbright Finland for Research, shares his first impressions of Finnish libraries.


    Lessons in letting go - releasing student energy speeds creation and use of our art and innovation lab

    Pioneer John Nordell enlisted his students to put the Art and Innovation Lab together. The result was one of the best experiences he has had as an educator.

  • toni teaching fusion

    Teacher training for 3D printing

    Pioneer Dr. Toni Szymanski thought that 3D printing could engage students in math classes. To test this out, she had to learn all about 3D printing first.

    ceramic stamps

    Digital fabrication informs ceramics decorative process

    Pioneer Young Kim blends his classical arts background with digital fabrication to create a ceramic project that incorporates 3D printing.


    Modeling rocks at iCREATE

    iCREATE's Tiffany Huang shared an iCREATE success story about Jackie Zheng.

  • Empathy map

    Elementary-College Engineering Design partnership

    Pioneer Matthew Wigdahl writes about how his fifth graders and local undergraduate engineering students learn from each other.


    Introducing Ultimaker’s Core Lessons Set for STEAM Educators

    Designed by the Ultimaker North America Community Team, our new Core Lessons: STEAM Set is a resource for educators who need inspiration and ideas when they bring 3D printing into their classrooms.


    Empower one MakerGirl, empower the world

    how the group traveled 10,000 miles around the country to help bring 3D printing workshops to over 1,000 young girls. In this week's post we catch up with the organization that is still working to create a new generation of confident, creative women leade

  • Georgia Connections Academy

    Building a mobile maker space: part 2—up and rolling

    So what exactly does a Mobile MakerSpace look like? That's the question I had to ask myself once I began the project of bringing 3D printing technology to virtual students. When we started this project, we knew we needed something that would be easy to

    Building a mobile makerspace: part 1— getting started

    Building a mobile makerspace: part 1— getting started

    Pioneer Wendy Aracich is putting together and implementing a mobile MakerSpace for her virtual school of 4000 students spread across the state of Georgia.


    Tactile Problem/Solution Bank Community Project

    3D modeling and printing should be accessible of every educator so that they may offer their students tactile means to understand spatial concepts.

  • Design Engine Box

    Design Engine community project

    We want to challenge educators and students to help evolve the Design Engine game. We want to see how you're using or modifying the game with your students, and we want to incorporate your ideas into the next edition.

    coca cola upcycle

    Upcycling community project

    Upcycling challenges students and educators to use their creativity and 3D printing skills to breathe new life into a few familiar objects.


    Construct3D to Kamehameha Ed Tech Conference

    Last year Pioneer Greg Kent traveled from Hawaii to North Carolina to attend Construct3D 2017. We thought we'd share his reflections with you now since we recently announced Construct3D 2018

  • Plastic Ocean by Kevin Krejci

    Ocean Plastic Community Project

    The Ultimaker Community Team will be launching a series of interdisciplinary projects over the next few months that challenge students to research, explore, design, and 3D print. Ocean Plastic is the first project of this series.


    3D printed fractals at JMU 3SPACE

    Pioneer Professor Laura Taalman, (a.k.a. mathgrrl), reviews a multi-week study of fractals by general education math students in the JMU 3D printing classroom.


    Using drones and 3D printing to develop design thinking during a summer robotics camp

    Pioneer Yuriy Drubinskiy writes about his experience leading a summer program and how creating drones with 3D printing brings form, structure, and design together.

  • The Starter Pack launch event at Digital Harbor Foundation

    Introducing the Ultimaker Design Engine Starter Pack

    Presenting the Ultimaker Design Engine Starter Pack: a game created to provoke, inspire, and entertain students, educators, 3D designers, artists, and engineers of all experience levels!

    first puzzle cube and package to be made on a 3D printer entirely out of PLA

    Davidson Desktop Doohickeys: Puzzle cubes

    Pioneer Adam Davidson writes about a project in his curriculum that is a rite of passage for his high school's engineering program students. He explains at how it started and what caused it to change

    soft robot mold

    3D printing with UMaine Bioengineering students

    If it’s happening in Ultimaker’s world, you can find out about it here. 3D printing stories about inspiring moments, original 3D printed projects and much much more.