Diese Seite wird auf Englisch angezeigt, da Sie in der von Ihnen gewählten Sprache nicht verfügbar ist.

coca cola upcycle-1

Upcycling community project

  • Informal learning
  • Technology

The Ultimaker North America community team is proud to present the first of the 2018 community projects: Upcycling. This project challenges students and educators to use their creativity and 3D printing skills to breathe new life into a few familiar objects that might have been destined for the recycling bin or trash can.

What's this all about?

When creating a product, designers make deliberate choices about the utility of the objects and materials that they use, the manufacturing process that they choose, the length of the product's useful life, and what happens to the product after it is no longer needed. Bad design results when a designer fails to consider all of these factors, or chooses to ignore any of the unpleasant consequences of their decisions.

An example of a careful and considered design comes from Maille, a French condiment manufacturer. Maille has a history of packaging their mustard, mayonnaise, and gherkins in containers designed to be collected and reused as drinking glasses. This is an example of intended reuse.

Upcycling, or creative and unintended reuse, is the process of transforming by-products, waste materials, useless, or unwanted products into new materials or products of better quality or for better environmental value. Upcycling is the opposite of downcycling, which involves converting materials and products into new materials of lesser quality, like converting plastic bottles into fleece. Synthetic fleeces, when washed, can release toxic synthetic microfibers into our environment where they are consumed by fish and other wildlife. Or these microfibers can bioaccumulate, concentrating toxins in larger animals that are higher up the food chain (see Microfiber Pollution and the Apparel Industry and Adventure Scientists).

Upcycling can produce surprising, charming, useful, and novel objects. The site Upcycle That curates and creates the best upcycling ideas, and Popsugar recently posted about 200 upcycling ideas.

The challenge

This Ultimaker community project starts January 2018 and culminates at Construct3D October 5th - 8th 2018, in Atlanta, Georgia, with an exhibition of products that have been upcycled with the help of 3D printing. But not just any products - what we would like to see upcycled are Coca-Cola products. Why Coca-Cola? Because Atlanta is the home of Coca-Cola. It's the perfect place to show off your transformations of bottles and cans into new and inspired products.

Over the Spring 2018 semester and up until September 20th, we invite students, educators, and anyone in the community to create upcycled Coca-Cola projects. We ask that all models be uploaded to Youmagine, and tagged “#upcycling.”

Some inspiration

cereal box

Cereal box townhouse
by dadhoc

campbell planter

Campbell planter - Fully 3D printed self-watering planter
by FLOWALISTIK

spool holder

Spool tool desk organizer
by MatterHackers

greenhouse

Mason jar mini greenhouse
by ekopapers

takeout

Takeout garden - reuse your takeout cups
by www_i

For more information about this project, go to the Upcycling community project page.

Upcycling community project

Read more education blogs

  • Naturalis Biodiversity Center: Prehistoric prints, cutting-edge technology

    Naturalis Biodiversity Center: Prehistoric prints, cutting-edge technology

    Naturalis Biodiversity Center, the Netherlands’ national natural history museum, is using 3D printing to create both partial and full dinosaur skeletons for public display.

    • History
    • Informal learning
  • College of the Desert 3D printing club

    Feel the Action: Learn about how a college is changing lives in ways we can touch!

    A 3D printing club emerges at College of the Dessert to help make ideas accessible to all students

    • Special education
    • Technology
  • Testing Quadcopter

    How the tools we use influence the designs we make

    Michael Delaney writes about his iterative process of integrating electronics and 3D printing in his programmable quadcopter project.

    • Informal learning
    • Technology
  • Ultimaker Met

    Bringing 3D printing to the Metropolitan Museum of Art

    Part of the mission from Ultimaker North America's Community team is to help educators get up and running with 3D printing and to help them find meaningful ways to integrate the technology into their curriculum while celebrating their successes. When we w

    • Secondary education
    • History
  • Smithsonian Learning Lab

    3D printing as part of the Smithsonian Learning Lab

    Pioneer Christopher Sweeney shares the work he did with 3D printing and the Smithsonian Learning Lab to create collections of educational resources, organized and structured for teaching and learning.

    • Informal learning
    • Art
  • Harvard calculus courses use 3D printed models to engage students

    Harvard calculus courses use 3D printed models to engage students

    What is the best way to teach concepts like surface area and volume relating to mathematical objects in a three-dimensional world? The curricular design team at Harvard University thinks the...

    • University
    • Mathematics
  • Mathematica Tea Light Holder

    3D Design in Mathematica: Tea Light Holders

    If it’s happening in Ultimaker’s world, you can find out about it here. 3D printing stories about inspiring moments, original 3D printed projects and much much more.

    • Informal learning
    • Mathematics
  • Code your 3D designs with Tinkercad’s new Codeblocks app

    Code your 3D designs with Tinkercad’s new Codeblocks app

    Tinkercad released Codeblocks last June, and now that it's out of Beta, Pioneer Rob Morrill tells us how he uses it.

    • Informal learning
    • Technology
  • printingUltibot

    Modifying an STL with Tinkercad

    When Ultimaker Pioneer Alex Larson contacted me about the Ultibot-D project, I was super excited. As a teacher and parent, I am a huge cheerleader for risk. I printed the base models at ⅕ scale and gave it to my students to explore

    • Primary education
    • Technology
  • Ultimaker at Camp

    Math Camp: Having fun doing stuff

    Pioneer Dr Toni Szymanski writes about summer fun at camp with 4th and 5th graders, math, and 3D printing.

    • Primary education
    • Mathematics
  • 3D printing for glass

    GlitchCraft

    Guest blogger Astrida Valigorsky writes about combining the old and the new at Timothy Belliveau's GlitchCraft class where students combined 3D printing and glass blowing.

    • Informal learning
    • Technology
  • basecampProject

    Using Basecamp to manage your classroom/makerspace projects and print queue

    Pioneer Andrew Woodbridge uses Basecamp to organize his students' projects, and he explains how you can too.

    • Secondary education
    • Technology
  • 3D printing in math and chemistry

    A unique 3D printing collaboration between mathematics and chemistry faculty

    Passing it on. After integrating 3D printing into her own math courses, Kristen Schreck helps spread 3D printing across disciplines at Saint Xavier University.

    • University
    • Science
  • World monument project

    Living world monuments assignment

    Pioneer Joanne Barrett shares about a middle school project that combines 3D printing, Augmented Reality, History, and Art.

    • Secondary education
    • History
  • parts in cura (1)

    My reintroduction to Netfabb

    A recent NetFabb workshop convinced the writer that they can't live without this application. See why it's time to take another look at Netfabb.

    • Secondary education
    • Technology
  • hero wrenchs

    Wrench Engineering

    Inspired by NASA printed in space wrench, Pioneer Rob Morrill gave his fifth graders a design challenge to design their own real-world tool.

    • Primary education
    • Engineering
  • goblet project

    Integrating 3D printing and The Goblet Project

    Pioneer Chris Hanusa shares one way he integrated 3D printing into his Integral Calculus class

    • University
    • Mathematics
  • Finland’s mobile libraries

    3D printers in the public library: Finland ahead of the curve

    US Professor Joshua Pearce, sponsored by Fulbright Finland for Research, shares his first impressions of Finnish libraries.

    • Informal learning
    • Technology
  • Happiness

    Lessons in letting go - releasing student energy speeds creation and use of our art and innovation lab

    Pioneer John Nordell enlisted his students to put the Art and Innovation Lab together. The result was one of the best experiences he has had as an educator.

    • University
    • Technology
  • toni teaching fusion

    Teacher training for 3D printing

    Pioneer Dr. Toni Szymanski thought that 3D printing could engage students in math classes. To test this out, she had to learn all about 3D printing first.

    • Secondary education
    • Mathematics
  • ceramic stamps

    Digital fabrication informs ceramics decorative process

    Pioneer Young Kim blends his classical arts background with digital fabrication to create a ceramic project that incorporates 3D printing.

    • Secondary education
    • Art
  • buckeyball

    Modeling rocks at iCREATE

    iCREATE's Tiffany Huang shared an iCREATE success story about Jackie Zheng.

    • Secondary education
    • Science
  • Empathy map

    Elementary-College Engineering Design partnership

    Pioneer Matthew Wigdahl writes about how his fifth graders and local undergraduate engineering students learn from each other.

    • Primary education
    • Engineering
  • 014-SchoolHero

    Introducing Ultimaker’s Core Lessons Set for STEAM Educators

    Designed by the Ultimaker North America Community Team, our new Core Lessons: STEAM Set is a resource for educators who need inspiration and ideas when they bring 3D printing into their classrooms.

    • Primary education
    • Technology
  • MakerGirl

    Empower one MakerGirl, empower the world

    how the group traveled 10,000 miles around the country to help bring 3D printing workshops to over 1,000 young girls. In this week's post we catch up with the organization that is still working to create a new generation of confident, creative women leade

    • Primary education
    • Technology
  • Georgia Connections Academy

    Building a mobile maker space: part 2—up and rolling

    So what exactly does a Mobile MakerSpace look like? That's the question I had to ask myself once I began the project of bringing 3D printing technology to virtual students. When we started this project, we knew we needed something that would be easy to

    • Secondary education
    • Technology
  • Building a mobile makerspace: part 1— getting started

    Building a mobile makerspace: part 1— getting started

    Pioneer Wendy Aracich is putting together and implementing a mobile MakerSpace for her virtual school of 4000 students spread across the state of Georgia.

    • Secondary education
    • Technology
  • LibraryLyna

    Tactile Problem/Solution Bank Community Project

    3D modeling and printing should be accessible of every educator so that they may offer their students tactile means to understand spatial concepts.

    • Secondary education
    • Languages
  • Design Engine Box

    Design Engine community project

    We want to challenge educators and students to help evolve the Design Engine game. We want to see how you're using or modifying the game with your students, and we want to incorporate your ideas into the next edition.

    • Informal learning
    • Technology
  • coca cola upcycle

    Upcycling community project

    Upcycling challenges students and educators to use their creativity and 3D printing skills to breathe new life into a few familiar objects.

    • Informal learning
    • Technology
  • pecha-kuchas

    Construct3D to Kamehameha Ed Tech Conference

    Last year Pioneer Greg Kent traveled from Hawaii to North Carolina to attend Construct3D 2017. We thought we'd share his reflections with you now since we recently announced Construct3D 2018

    • Secondary education
    • Technology
  • Plastic Ocean by Kevin Krejci

    Ocean Plastic Community Project

    The Ultimaker Community Team will be launching a series of interdisciplinary projects over the next few months that challenge students to research, explore, design, and 3D print. Ocean Plastic is the first project of this series.

    • Secondary education
    • Geography
  • fractal2

    3D printed fractals at JMU 3SPACE

    Pioneer Professor Laura Taalman, (a.k.a. mathgrrl), reviews a multi-week study of fractals by general education math students in the JMU 3D printing classroom.

    • University
    • Mathematics
  • Drone1

    Using drones and 3D printing to develop design thinking during a summer robotics camp

    Pioneer Yuriy Drubinskiy writes about his experience leading a summer program and how creating drones with 3D printing brings form, structure, and design together.

    • Secondary education
    • Technology
  • The Starter Pack launch event at Digital Harbor Foundation

    Introducing the Ultimaker Design Engine Starter Pack

    Presenting the Ultimaker Design Engine Starter Pack: a game created to provoke, inspire, and entertain students, educators, 3D designers, artists, and engineers of all experience levels!

    • Informal learning
    • Technology
  • first puzzle cube and package to be made on a 3D printer entirely out of PLA

    Davidson Desktop Doohickeys: Puzzle cubes

    Pioneer Adam Davidson writes about a project in his curriculum that is a rite of passage for his high school's engineering program students. He explains at how it started and what caused it to change

    • Secondary education
    • Engineering
  • soft robot mold

    3D printing with UMaine Bioengineering students

    If it’s happening in Ultimaker’s world, you can find out about it here. 3D printing stories about inspiring moments, original 3D printed projects and much much more.

    • University
    • Science
  • Star Wars and STEAM

    3D printing, Arduino, and Star Wars: A guide to K-12 STEAM engagement

    If it’s happening in Ultimaker’s world, you can find out about it here. 3D printing stories about inspiring moments, original 3D printed projects and much much more.

    • Secondary education
    • Technology
  • 3D-printed molecules

    3D printable molecular models

    Tandy Grubbs, Professor of Chemistry, writes about how chemistry students at Stetson University are taking advantage of 3D printing to better visualize the molecular world.

    • University
    • Science
  • Cam-ball-launcher

    Nautilus cam ball launcher

    Design process is about discovery through iteration. Pioneer Brad Whitehead describes how his FTC robotics team learned this while working on a unique ball launcher.

    • Special education
    • Technology
  • animal adaptations

    Animal Adaptations

    If it’s happening in Ultimaker’s world, you can find out about it here. 3D printing stories about inspiring moments, original 3D printed projects and much much more.

    • Primary education
    • Technology
  • Launching water rockets

    3D water rockets

    Pioneer Tim Cooper explains what to do with a First Lego League team in the off season when they love rockets and 3D printing.

    • Primary education
    • Science
  • Three reasons for open source tech in your 3D printing classroom

    Three reasons for open source tech in your 3D printing classroom

    Pioneer Joshua Pearce explains why educators should consider using free and open source options in and out of the 3D printing classroom.

    • University
    • Technology
  • 3D printing in Multivariable Calculus

    Our 3D printing journey in Multivariable Calculus

    Here’s a story of the next generation of 3D printing pioneers exploring the 3D printing technology in Multivariable Calculus with the Ultimaker 2+.

    • University
    • Mathematics
  • 3D printed Cryptex puzzle

    #1 reason to love math: 3D printed puzzles

    Pioneer Andreas Kaiser writes about the power of puzzles in the classroom and how recreating or designing puzzles is a perfect fit for his engineering students.

    • Secondary education
    • Mathematics
  • 3D printed whistles

    Thinking about the environment

    The learning curve associated with 3D printing can produce a lot of 3D printed waste. It's time to start exploring and thinking about more sustainable options.

    • Informal learning
    • Geography
  • 3D printing in the classroom

    Why I use 3D printing in the classroom (and why you should too!)

    While 3D printing is not new to designers, engineers and other professionals in need of rapid prototyping tools, it is still a new and exciting technology for our students. Pioneer Grace Bennett shares why teachers should get started with 3D printing.

    • Secondary education
    • Technology
  • 3D printing artifacts

    3D printing artifacts from the Penn Museum

    The chance to hold a 3D printed historical artifact in our hands is one of the greatest ways to boost students' engagement with science, engineering, and culture. Learn how challenging and exciting it can really be.

    • Secondary education
    • History
  • UTEP Lab

    Managing an open 3D printing lab

    What’s it like to be a student administrator for a 3D printing lab space? What kind of knowledge and experiences could you offer to students at your own school by hiring them for such position?

    • University
    • Engineering